Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Craftex CX811
Summary of Contents for Craftex CX811
- Page 1 MODEL CX811 UNIVERSAL BENDER USER MANUAL Version 2.0-2023...
- Page 2 CX811 PHYSICAL FEATURES Clamp Cam Shaft Work Stop Work Stop Clamp Die Bending Plate Knob Bending Plate Angle Stop Handle...
-
Page 3: Specifications
Slide the work stop onto the work stop rod N.W./G.W. (KG) 33/ 34 and thread the knob onto the work stop to secure it to the rod. UNPACKING The CX811 is properly packaged in a MOUNTING carton safe transportation. When... - Page 4 "Direct Mount" is to simply secure the bender to the workbench using lag screws. See figure 3.
-
Page 5: Operation
REPETITIVE BENDS The CX811 comes with work stop and angle stop which allow user to accurately bend multiple work-pieces to the same angle. To use the work stop and angle stop: Position the workpiece into the bender and adjust the work stop against the end of the work-piece. - Page 6 CX811 - PARTS DIAGRAM AND PARTS LIST PART# DESCRIPTION PART# DESCRIPTION CLAMP DIE NUT - SQUARE BENDING PLATE CLAMP CAM SHAFT SLIDING BLOCK SHAFT SCREW- M8 X 20 NUT - HANDLE M8 X 15 ANGLE STOP WORK STOP PRESS PLATE...
-
Page 7: Warranty
This warranty shall not apply to consumable products such as blades, bits, belts, cutters, chisels, punches etceteras. Craftex shall in no event be liable for injuries, accidental or otherwise, death to persons or damage to property or for incidental contingent, special or consequential damages arising from the use of our products.
Need help?
Do you have a question about the CX811 and is the answer not in the manual?
Questions and answers