Spantree_Fast Messages - Cisco WS-C2955T-12 Software Manual

Error Message and Recovery Procedures
Error Message SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking [chars] on vlan [dec].
Port consistency restored.
Explanation
Recommended Action
Enter the show tech-support command to gather data that might provide information to determine
the nature of the error. If you cannot determine the nature of the error from the error message text or
from the show tech-support output, contact your Cisco technical support representative, and provide
the representative with the gathered information.
Error Message SPANTREE-3-PORT_SELF_LOOPED: [chars] disabled.
Explanation
Recommended Action
Enter the show tech-support command to gather data that might provide information to determine
the nature of the error. If you cannot determine the nature of the error from the error message text or
from the show tech-support output, contact your Cisco technical support representative, and provide
the representative with the gathered information.

SPANTREE_FAST Messages

This section contains the Spanning Tree Protocol fast convergence error messages.
Error Message SPANTREE_FAST-6-PORT_FWD_UPLINK: Port [chars] in vlan [dec] moved to
Forwarding (UplinkFast).
Explanation
Recommended Action
Error Message SPANTREE_FAST-6-RECD_INF_BPDU: Received inferior BPDU on port [chars]
in [chars].
Explanation
Recommended Action
Error Message SPANTREE_FAST-6-RECD_RLQ_REPLY: Received RLQ response PDU on port
[chars] in [chars].
Explanation
Recommended Action
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
A-38
No explanation is available at this time.
Copy the error message exactly as it appears on the console or in the system log.
No explanation is available at this time.
Copy the error message exactly as it appears on the console or in the system log.
No explanation is available at this time.
No action is required.
No explanation is available at this time.
No action is required.
No explanation is available at this time.
No action is required.
Appendix A System Messages
78-6511-08