Cisco WS-C2955T-12 Software Manual page 99

Chapter 4 General Switch Administration
Table 4-2 Default Settings and Where to Change Them (continued)
Feature
Security
Password
Address security
Trap manager
Community strings
Port security
Protected port
Port security aging
Bridge Protocol Data Unit
(BPDU) Guard
Terminal Access Controller
Access Control System
Plus (TACACS+)
Remote Authentication
Dial-In User Service
(RADIUS)
1. Available only from a Device Manager session on a command-capable switch, which is not a cluster member.
2. Available only from a cluster management session.
78-6511-08
Default
Setting Concepts and CLI Procedures
None "Passwords" section on page 5-16
"Assigning Passwords and Privilege
Levels" section on page
Refer to the latest switch release notes
(http://www.cisco.com/univercd/cc/td/doc/
product/lan/c2900xl/index.htm).
Disabled "Managing the MAC Address Tables"
section on page
0.0.0.0 "Adding Trap Managers" section on
page 6-49.
public "SNMP Community Strings" section on
page 5-16 and
Strings" section on page
Documentation set for Cisco IOS
Release 12.0 on Cisco.com.
Disabled "Enabling Port Security" section on
page 7-10.
Disabled "Configuring Protected Ports" section on
page 7-9.
Disabled "Configuring Port Security Aging" section
on page 7-11.
Disabled "Configuring BPDU Guard" section on
page 6-47.
Disabled "Configuring TACACS+" section on
page 6-51.
Disabled "Controlling Switch Access with
RADIUS" section on page
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
and
6-11.
6-15.
"Entering Community
6-49.
6-55.
Default Settings
CMS Option
–
Administration >MAC
Addresses
Administration > SNMP
Administration > SNMP
Port > Port Security
Port > Protected Port
–
–
–
–
4-11