Cisco WS-C2955T-12 Software Manual page 334

Error Message and Recovery Procedures
Error Message SYS-2-CHUNKBADPOOLSIZE: Bad poolsize returned by the system :[int]
Explanation
Recommended Action
Enter the show tech-support command to gather data that might provide information to determine
the nature of the error. If you cannot determine the nature of the error from the error message text or
from the show tech-support output, contact your Cisco technical support representative, and provide
the representative with the gathered information.
Error Message SYS-2-CHUNKBOUNDSIB: Error noticed in the sibling of the chunk
[chars]Chunk index :[dec], Chunk real max :[dec]
Explanation
Recommended Action
Enter the show tech-support command to gather data that might provide information to determine
the nature of the error. If you cannot determine the nature of the error from the error message text or
from the show tech-support output, contact your Cisco technical support representative, and provide
the representative with the gathered information.
Error Message SYS-2-CHUNKEXPANDFAIL: Could not expand chunk pool for [chars]. No
memory available
Explanation
Recommended Action
Enter the show tech-support command to gather data that might provide information to determine
the nature of the error. If you cannot determine the nature of the error from the error message text or
from the show tech-support output, contact your Cisco technical support representative, and provide
the representative with the gathered information.
Error Message SYS-2-CHUNKINCONSIS: Inconsistant counters for chunk :[chars]total
free [dec]/[dec], total sibs [dec]/[dec], total alloc [dec]/[dec]
Explanation
Recommended Action
Enter the show tech-support command to gather data that might provide information to determine
the nature of the error. If you cannot determine the nature of the error from the error message text or
from the show tech-support output, contact your Cisco technical support representative, and provide
the representative with the gathered information.
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
A-42
The system returns a non-optimal pool size. You need to change pool sizes.
Copy the error message exactly as it appears on the console or in the system log.
A software error occurred.
Copy the error message exactly as it appears on the console or in the system log.
There is not enough processor memory left to increase this chunk pool.
Copy the error message exactly as it appears on the console or in the system log.
The system returns a non-optimal pool size. You need to change pool sizes.
Copy the error message exactly as it appears on the console or in the system log.
Appendix A System Messages
78-6511-08