Taking Out What You Need - Cisco ME-C3750-24TE-M Hardware Installation Manual

Taking Out What You Need

Caution
Taking Out What You Need
Catalyst 3750 Switch Hardware Installation Guide
1-2
Do not start Express Setup when there are any devices connected to the switch or
connect a switch that is already in Express Setup mode to any device other than
the PC or workstation that is being used to configure it. The switch acts as a DHCP
server during the Express Setup procedure, and only the PC or workstation
connected to the switch after Express Startup is started should receive a DHCP
address from the switch.
Remove the items shown in
Figure 1-1 Catalyst 3750 Switch and AC Power Cord
1
SYS T
RPS
MAS TR
STA T 1X
DUP LX
SPE ED
STA CK
MO DE
2X
2
1 Switch 2 AC power cord
You also need to provide an Ethernet (Category 5) straight-through cable (not
included), as shown in Figure 1-2, to connect the switch to your PC or
workstation.
Figure 1-1 from the shipping container.
11X
13X
Ca tal yst
23X
12X
14X
24X
Chapter 1 Using Express Setup
37 50
SER IES
78-15136-02