Taking Out What You Need; Equipment That You Supply To Run Express Setup - Cisco Catalyst 2960 Getting Started Manual

Taking Out What You Need

Taking Out What You Need

Equipment That You Supply to Run Express Setup

Catalyst 2960 Switch Getting Started Guide
1-2
Follow these steps:
1. Unpack and remove the switch and the accessory kit from the shipping box.
Return the packing material to the shipping container, and save it for future
2.
use.
Verify that you have received the items shown in the
3.
Contents" section. If any item is missing or damaged, contact your Cisco
representative or reseller for instructions. Some switch models might include
additional items that are not shown.
You need to supply this equipment to run Express Setup:
PC
•
Ethernet (Category 5) straight-through cable (as shown)
•
Chapter 1 Getting Started Guide
"Shipping Box
OL-9368-03