Table of Contents
Advertisement
Chapter 3
Switch Installation
To prevent the switch from overheating, do not operate it in an area that
Warning
exceeds the maximum recommended ambient temperature of 113° F (45° C). To
prevent airflow restriction, allow at least 3 inches (7.6 cm) of clearance around
the ventilation openings.
When installing or replacing the unit, the ground connection must always be
Warning
made first and disconnected last.
Warning
This equipment is intended to be grounded. Ensure that the host is connected to
earth ground during normal use.
Warning
Do not work on the system or connect or disconnect cables during periods of
lightning activity.
Warning
Ultimate disposal of this product should be handled according to all national
laws and regulations.
Warning
Attach only the Cisco RPS (model PWR675-AC-RPS-N1) to the RPS receptacle.
Class 1 laser product
Warning
Warning
Avoid exposure to the laser beam.
78-15136-02
Catalyst 3750 Switch Hardware Installation Guide
Preparing for Installation
3-3
Hide quick links:
Advertisement
Table of Contents
