Problem Solving Guide - Miele H 2465 B Operating And Installation Instructions

Problem solving guide

Many malfunctions and faults that can occur in daily operation can be easily
remedied. You can save time and money in many cases, as you do not need to call
your Miele dealer.
The following tables are designed to help you to find the cause of a malfunction or a
fault and to resolve it.
Issue
The buzzer does
not sound.
System lock 
appears in the
display.
appears in
12:00
the display.
appears
Power cut
in the display.
Max. op. hours
appears in
reached
the display.
and a fault
Fault
code not listed
here appears in the
display.
A noise can be
heard after a
cooking
programme.
The oven has
switched itself off.
62
Cause and remedy
The buzzers are deactivated or set at too low a volume.
 Switch on the buzzers or increase the volume with the
|
Volume Buzzer tones
The  system lock has been activated.
 Confirm with OK.
Press "OK" for 6 secs
 You can deactivate the system lock for a cooking process
by touching the OK sensor control for at least 6 seconds.
 If you want to permanently deactivate the system lock,
select the
System lock 
The power supply was interrupted for longer than 5 minutes.
 Reset the time of day (see "Settings – Time of day").
Cooking process times will also need to be reset.
There has been a brief power cut. This has caused the
current cooking process to stop.
 Turn the operating mode selector to 0.
 Restart the cooking process.
The oven has been operating for an unusually long time. This
has triggered the safety switch-off function.
 Confirm with OK.
The oven is now ready to use.
A fault has occurred that you cannot resolve.
 Call your Miele dealer.
The cooling fan remains switched on after a cooking
programme (see "Settings – Cooling fan run-on").
To save power, the oven switches off automatically if a
button is not pressed after a certain amount of time or after a
cooking programme has ended.
 Switch the oven back on.
setting.
will appear.
| setting.
Off