Problem Solving Guide; Messages In The Display - Miele DGC 7840 X Operating And Installation Instructions

Problem solving guide

Many malfunctions and faults that can occur in daily operation can be easily
remedied. You can save time and money in many cases, as you do not need to call
the the Miele Dealer.
The following tables are designed to help you to find the cause of a malfunction or
a fault and to resolve it.

Messages in the display

Issue
F10
F11
F20
F44
F55
166
Cause and remedy
The suction hose in the water container is not
inserted correctly or not vertical.
 Correct the position of the suction hose:
The drain hoses are blocked.
 Proceed as described in „Cleaning and care -
Descaling".
 If the fault message appears again, switch the
appliance off and contact your Miele dealer.
There is a technical fault.
 Turn the steam oven off and then back on again
after a few minutes.
 If the same message appears again, contact your
Miele dealer.
The maximum operating time for a cooking function
has been exceeded. This has triggered the safety
switch off device.
 Switch the steam oven off and then back on again.
The steam oven is immediately ready for use again.