Advertisement
Quick Links
Thank you for your purchase of our new SS5 CrossLink Grille Kit.
CAD-designed to use existing mounting points, this kit is compatible
with the 2021+ Ford Bronco with the modular steel bumper.
Installation instructions are included below.
Please contact us if you have any questions.
Tools Needed: T40 torx bit, ratchet, 10mm wrench, 10mm socket
Passenger-side
2. Loosely install your new grille brackets, using the OEM T40 bolts and T40 bit.
3. Assemble your SS5 lightbar using the included CrossLink lightbar instructions.
PAGE 1
Driver-side
SS
CrossLink Grille Kit
5
1. Using a T40 Torx bit and rachet, remove the
four bolts on the bumper shown in the pictures
to the left.
(314) 205-3033
Ford Bronco
See back for further instructions.
WWW.DIODEDYNAMICS.COM
Advertisement
Related Manuals for Diode Dynamics Stage Series
Summary of Contents for Diode Dynamics Stage Series
- Page 1 Ford Bronco CrossLink Grille Kit Thank you for your purchase of our new SS5 CrossLink Grille Kit. CAD-designed to use existing mounting points, this kit is compatible with the 2021+ Ford Bronco with the modular steel bumper. Installation instructions are included below. Please contact us if you have any questions.
- Page 2 Stage Series backlit light already installed, you may choose to tap it into the same switch. 7. Connect positive and negative battery wires to the battery, or to main power terminals near the fuse box.
Need help?
Do you have a question about the Stage Series and is the answer not in the manual?
Questions and answers