Diode Dynamics Stage Series Manual

Please contact Diode Dynamics should you have any questions about the installation
or wiring process, at 314-205-3033 (10a-5p CST) or contact@diodedynamics.com.
NEED MORE HELP?
Scan the QR code to link to our YouTube Channel!
We continuously bring in vehicles to our testing garage in order to
create step-by-step videos to walk you through the installation process
on your specific vehicle. Scan the QR code to see all our installation
videos. Be sure to subscribe to our channel to stay up-to-date on the
newest products and videos from Diode Dynamics!
This installation guide is for the following SKUs:
Jeep JL Wrangler/JT Gladiator SS5 CrossLink Windshield Lightbar Kit, White Combo (DD6821 Sport, DD7262 Pro)
Jeep JL Wrangler/JT Gladiator SS5 CrossLink Windshield Lightbar Kit, Yellow Combo (DD6822 Sport, DD7263 Pro)
Jeep JL Wrangler/JT Gladiator SS50 Windshield Lightbar Kit, White Combo (DD6823)
Jeep JL Wrangler/JT Gladiator SS50 Windshield Lightbar Kit, Amber Combo (DD6824)
8
100% SATISFACTION
GUARANTEE
year
w arranty
PAGE 3 (314) 205-3033
PP0185B
9. Connect positive and negative battery wires
to the battery, or to main power terminals
near the fuse box.
10. Adjust and aim your lightbar and tighten
all the screws.
If you purchased the SS5 kit, adjust the lightbar
to the desired curvature and tighten all screws.
Make sure the rubber bumpers on the supports
touch the windshield frame and then while a
friend creates tension by pulling the bar out,
tighten the CrossLink supports. This will
help mitigate vibration.
Secure the wires and test thoroughly
to complete your installation.
WWW.DIODEDYNAMICS.COM
Jeep JL Wrangler/JT Gladiator
Windshield Lightbar Kit