Diode Dynamics Stage Series Manual

11. Repeat steps 7 through 9 to install the rivnut on the other side of the vehicle.
12. Then reverse steps 2 through 4 to reinstall the grille.
13. Using a 10mm socket and wrench, secure the brackets back onto the frame rail. Use the
included 20mm M6 flange bolts and oversized washers on the top of the brackets to secure
them to the rivnuts. Then use the included M6 20mm flange bolts, oversized square washers,
and flange nuts to secure the brackets to the lower portion of the frame rail.
14. Reverse step 5 to reinstall the front underbody cladding.
15. If installing two pods, use the included universal mount brackets and hardware to install
directly onto the base brackets.
Driver-side bracket
18. Mount the assembled SS5 lightbar onto the brackets securing it loosely with the
provided M6 hardware.
19. Connect the light(s) to the included wiring harness. Route the wiring harness to the
battery and connect the ring terminals to the positive and negative battery terminals. Use
the included toggle switch and run it into your cabin. All power sources must be fused.
20. Secure the wires, test thoroughly, and tighten all hardware to complete your installation.
NEED MORE HELP?
Scan the QR code to link to our YouTube Channel!
We continuously bring in vehicles to our testing garage in order to
create step-by-step videos to walk you through the installation process
on your specific vehicle. Scan the QR code to see all our installation
videos. Be sure to subscribe to our channel to stay up-to-date on the
newest products and videos from Diode Dynamics!
This installation guide is for the following SKUs:
Jeep Jk Wrangler SS5 CrossLink Bumper LED Pod Kit, White Combo (DD7274 Sport, DD7275 Pro)
Jeep Jk Wrangler SS5 CrossLink Bumper LED Pod Kit, White Driving (DD7276 Sport, DD7277 Pro)
Jeep Jk Wrangler SS5 CrossLink Bumper LED Pod Kit, Yellow Combo (DD7284 Sport, DD7285 Pro)
Jeep Jk Wrangler SS5 CrossLink Bumper LED Pod Kit, Yellow Driving (DD7286 Sport, DD7287 Pro)
Jeep Jk Wrangler SS5 CrossLink Grille Lightbar Kit, White Combo (DD7229 Sport, DD7272 Pro)
Jeep Jk Wrangler SS5 CrossLink Grille Lightbar Kit, Yellow Combo (DD7230 Sport, DD7273 Pro)
PAGE 4 (314) 205-3033
PP0189
16. If installing the 4-pod CrossLink lightbar,
use a 5mm Allen key, 10mm wrench, and
the provided 16mm M6 screws, washers,
and flange nuts to install the SS5 CrossLink
universal brackets onto the base brackets.
17. Assemble your lightbar using the included
CrossLink lightbar instructions.
WWW.DIODEDYNAMICS.COM
SS
Thank you for your purchase of our new SS5 CrossLink Bumper/
Grille Kit. CAD-designed to use existing mounting points, this
kit is compatible with the 2007-2018 Jeep JK Wrangler.
Installation instructions are included inside.
Please contact us if you have any questions.
Tools Needed: Trim removal tool, ratchet, 10mm socket, drill, 10mm drill bit,
10mm wrench, 5mm Allen key, 4mm Allen key
(314) 205-3033
Jeep JK Wrangler
5 CrossLink Bumper/Grille Kit
See inside for instructions.
WWW.DIODEDYNAMICS.COM PAGE 1