INSTALLATION FORWARD This manual covers the model # 5552 OVEN / WARMER COMBOS. OVEN / WARMER COMBO INSTALLATION CHECKING SHIPMENT Unpack the shipping crate and check thoroughly for any damage which may have occurred in transit. Any claims should be filed immediately with the transportation company. ELECTRICAL REQUIREMENTS Voltage for your warmer is 120 Volt, 60 Cycle, single phase.
Page 4
OPERATING INSTRUCTIONS CONTROLS AND THEIR FUNCTIONS WARMER LIGHT SWITCH Flipping this switch to the "ON" position energizes the light and rotisserie motor. Note: The rotisserie will only function with the door closed WARMER HEAT SWITCH Flipping this switch to the "ON" position energizes the heat element in the warmer portion of the cabinet.
CARE AND CLEANING The stainless steel body of the Warmer is easy to keep clean. Usually a damp cloth will remove all dirt and grease spots. NEVER USE ABRASIVES on the stainless steel body. The glass should always be clean and sparkling. Remember the inside of the glass must be cleaned too.
3. Please include your model name and machine serial number (located on the machine nameplate) with your order. 1. Address all parts orders to: Parts Department Gold Medal Products Co. 10700 Medallion Drive Cincinnati, Ohio 45241-4807 or, place orders at:...
Page 8
PARTS LIST – OVEN / WARMER COMBO Model # 5552PR 5552PZ 5552PRC 5552PZC Item Part Part Part Part Description Quantity 87085 87085 87148 87148 Lead-in Cord 43288 43288 43288 43288 Oven Heat Element 400 Watt 40712 40712 40712 40712 Plunger Switch 41033 41033 41033...
Page 9
UPPER CONTROL CABINET WIRING IS 16GA CSA STYLE TEW WIRE 26/30 STRAND COPPER, 600VOLT – 105C U.L. 1011, 1015, 1230, 1335 LOWER CONTROL CABINET WIRING IS #16AWG MGT, CSA STYLE A-24, 26/30 STRAND TYPE A NICKLE WIRING DIAGRAM FOR 5552 OVEN / WARMER COMBO...
WARRANTY WE WARRANT to the original purchaser the Gold Medal equipment sold by us to be free from defects in material or workmanship under normal use and service. Our obligation under this warranty shall be limited to the repair or replacement of any...
Need help?
Do you have a question about the 5552 Series and is the answer not in the manual?
Questions and answers