Management Options - Cisco 887V - Integrated Services Router Software Configuration Manual

Management Options

Management Options
The wireless device runs its own version of Cisco IOS software that is separate from the Cisco IOS
software operating on the router. You can configure and monitor the access point with several different
tools:
•
•
•
Note
Note
Use the interface dot11radio global configuration CLI command to place the wireless device into the
radio configuration mode.
Cisco 880 Series Integrated Services Router Software Configuration Guide
2-2
Cisco IOS software CLI
Simple Network Management Protocol (SNMP)
Web-browser interface:
http://cisco.com/en/US/docs/wireless/access_point/12.4_10b_JA/configuration/guide/scg12410b-c
hap2-gui.html
The web-browser interface is fully compatible with Microsoft Internet Explorer version 6.0 on
Windows 98, 2000, and XP platforms, and with Netscape version 7.0 on Windows 98, 2000, XP,
and Solaris platforms.
Avoid using the CLI and the web-browser tools concurrently to configure the wireless device. If
you configure the wireless device using the CLI, the web-browser interface may display an
inaccurate interpretation of the configuration. This inappropriate display of information does not
necessarily mean the wireless device is misconfigured.
Chapter 2 Wireless Device Overview
OL-22206-01