Information Needed For Configuration - Cisco 887V - Integrated Services Router Software Configuration Manual

Information Needed for Configuration

line con 0
no modem enable
line aux 0
line vty 0 4
password cisco
login
transport input telnet ssh
!
scheduler max-task-time 5000
!
webvpn cef
end
Router#
Information Needed for Configuration
You need to gather some or all of the following information, depending on your planned network
scenario, before configuring your network:
•
•
•
Cisco 880 Series Integrated Services Router Software Configuration Guide
3-4
If you are setting up an Internet connection, gather the following information:
PPP client name that is assigned as your login name
–
PPP authentication type: Challenge Handshake Authentication Protocol (CHAP) or Password
–
Authentication Protocol (PAP)
PPP password to access your Internet service provider (ISP) account
–
DNS server IP address and default gateways
–
If you are setting up a connection to a corporate network, you and the network administrator must
generate and share the following information for the WAN interfaces of the routers:
PPP authentication type: CHAP or PAP
–
PPP client name to access the router
–
PPP password to access the router
–
If you are setting up IP routing:
Generate the addressing scheme for your IP network.
–
Determine the IP routing parameter information, including IP address and ATM permanent
–
virtual circuits (PVCs). These PVC parameters are typically virtual path identifier (VPI), virtual
circuit identifier (VCI), and traffic-shaping parameters.
Determine the number of PVCs that your service provider has given you, along with their VPIs
–
and VCIs.
For each PVC determine the type of AAL5 encapsulation supported. It can be one of the
–
following:
AAL5SNAP—This can be either routed RFC 1483 or bridged RFC 1483. For routed RFC 1483,
the service provider must provide you with a static IP address. For bridged RFC 1483, you may
use DHCP to obtain your IP address, or you may obtain a static IP address from your service
provider.
AAL5MUX PPP—With this type of encapsulation, you need to determine the PPP-related
configuration items.
Chapter 3 Basic Router Configuration
OL-22206-01