Interface Ports; Default Configuration - Cisco 887V - Integrated Services Router Software Configuration Manual

Interface Ports

Interface Ports
Table 3-1
equipment.
Table 3-1
Router
Cisco 880
Cisco 881, 881W, 881G,
881GW
Cisco 886, 886W, 886G,
886GW
Cisco 887, 887W
Cisco 887V, 887VW,
887VG, 887VGW
Cisco 888, 888W

Default Configuration

When you first boot up your Cisco router, some basic configuration has already been performed. All of
the LAN and WAN interfaces have been created, console and vty ports are configured, and the inside
interface for Network Address Translation (NAT) has been assigned. Use the show running-config
command to view the initial configuration, as shown in the following example for a Cisco 881W.
Router# show running-config
User Access Verification
Password:
Router> en
Password:
Router# show running-config
Building configuration...
Current configuration : 986 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$g4y5$NxDeM.0hON6YA51bcfGvN1
enable password ciscocisco
!
Cisco 880 Series Integrated Services Router Software Configuration Guide
3-2
lists the interfaces that are supported for each router and their associated port labels on the
Supported Interfaces and Associated Port Labels by Cisco Router
Interface
Fast Ethernet LAN
Wireless LAN
Fast Ethernet WAN
ADSLoverISDN
ADSL2oPOTS WAN
VDSL2oPOTS WAN
G.SHDSL WAN
Chapter 3 Basic Router Configuration
Port Label
LAN, FE0–FE3
(no label)
WAN, FE4
ADSLoPOTS
ADSLoPOTS
VDSLoPOTS
G.SHDSL
OL-22206-01