How To Use This Guide - Cisco 4700M Configuration Manual

Audience

How to Use This Guide

Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
xviii
This guide is intended for the following trained and qualified service personnel
who are responsible for configuring the ACE:
Web master
•
System administrator
•
System operator
•
This guide is organized as follows:
Chapter
Chapter 1, Configuring
Security Access
Control Lists
Chapter 2, Configuring
Authentication and
Accounting Services
Chapter 3, Configuring
Application Protocol
Inspection
Chapter 4, Configuring
TCP/IP Normalization
and IP Reassembly
Parameters
Chapter 5, Configuring
Network Address
Translation
Description
Describes how to configure security access control
lists (ACLs) on your ACE. ACLs provide basic
security for your network by filtering traffic and
controlling network connections.
Describes how to configure the ACE to perform user
authentication and accounting (AAA) services to
provide a higher level of security for users accessing
the ACE.
Describes how to configure application protocol
inspection for the ACE.
Describes how to configure TCP/IP normalization to
protect your ACE and the data center from attacks. It
also describes IP reassembly and UDP parameters.
Describes NAT and how to configure it on the ACE.
NAT protects your data center by hiding private
addresses from public networks.
Preface
OL-16202-01