Cisco 4700M Configuration Manual page 256

Viewing Application Protocol Inspection Statistics and Service Policy Information
For example, to display service policy statistics for the
APP_INSPECT_L4POLICY policy map, enter:
host1/Admin# show service-policy APP_INSPECT_L4POLICY
Status
-----------------------------------------
Context Global Policy:
To clear the service policy statistics, use the clear service-policy command. The
syntax of this command is as follows:
The policy_name argument, is the identifier of an existing policy map that is
currently in service (applied to an interface).
For example, to clear the statistics for the policy map
HTTP_INSPECT_L4POLICY that is currently in service, enter:
host1/Admin# clear service-policy HTTP_INSPECT_L4POLICY
Table 3-10
for an application protocol inspection policy map.
Table 3-10 Field Descriptions for the show service-policy detail Command
Field
Status
Description
Context Global
Policy
Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
3-132
: ACTIVE
service-policy: APP_INSPECT_L4POLICY
class: APP_INSPECT_L4CLASS
inspect dns:
max length: 0
curr conns
dropped conns
client pkt count : 0
server pkt count : 0
clear service-policy policy_name
describes the fields in the show service-policy detail command output
Output
Description
Status of the policy map as applied in a service policy to a
VLAN interface: Active or Inactive.
Optional description about the policy map.
Indicates whether the service policy has been applied
globally in configuration mode to all VLAN interfaces for
the context.
Chapter 3 Configuring Application Protocol Inspection
: 0 , hit count
: 0
, client byte count: 0
, server byte count: 0
: 0
OL-16202-01