Page of 88

Aiwa CX NMA545 Operating Instructions Manual Page 12

Aiwa stereo system user manual.
Hide thumbs
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
1
2
3
Press TUNER BAND to select a band, and press
+
DOWN or _
UP to select a station.
Press II SET to store the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to the station.
Preset number
Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
for all the bands have already been stored.
m
Use the remote control to select the preset number directly.
1 Press TUNER BAND to select a band.
2 Press numbered buttons O-9 and +10 to select a
preset number.
Example:
To select preset number 20, press +1O, +1O and O.
To select preset number 15, press +10 and 5.
Selecting a preset number on the main unit
Press TUNER BAND to select a band. Then, press>
repeatedly
or turn MULTI JOG.
Each time E is pressed, the next ascending number is selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
CLEAR, and press 11 SET within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
"FULL" is displayed if you attempt to store more than 32 preset
stations.
12
ENGLISH

Advertising

   Related Manuals for Aiwa CX NMA545

This manual also for:

Sx-r275, Sx-c605, Sx-wna555, Nsx-ma545

Comments to this Manuals

Symbols: 0
Latest comments:
  • Frank Humr Apr 11, 2017 06:32:
    Why are there 4 wires connected to the speaker