This unit is designed
of Type I
Press TAPE and press A PUSH EJECT to open
the cassette holder.
Insert a tape with the exposed side down. Push the cassette
holder to close.
Press F to start play.
Only the side facing out from the unit can be played back.
Selected deck number
To select a playing deck
When tapes are loaded in both decks, press TAPE first to select
The selected deck number is displayed.
To stop play, press
To pause play (deck 2 only), press Il.
To resume play, press
To fast forward or rewind, press +
to stop the tape.
To start play when the power is off (Direct Play Function)
Press TAPE. The power is turned on and play of the inserted
To set the tape counter to 0000
CLEAR in stop mode.
The counter is also set to 0000 when the cassette holder is
When tapes are loaded in both decks
After playback on deck 1 finishes, the tape in the deck 2 will start
to play without interruption and will stop at the end of the tape.
High position tapes can also be played back in this unit. When
playing back a Type II tape, turn MULTI JOG to display "SOF~
in the display. This will set the optimum playback sound for Type
II tapes. However, "SOFT" playback will be canceled if any
graphic equalizer is selected (page 10), the unit is switched to a
different audio source, the cassette holder is open, or when the,
power is turned off.