Duplo DPC-600PKG Installation And Operation Manual page 71

Menu Items
SP1-SP8
K3 Speed
Cut Speed
Moving Speed
Cut Down Speed
Tool selection
Speed &
Bending Speed
Acceleration
K3 Acceleration
Cut acceleration
Move acceleration
Cutdown Acceleration
K3 down delay
K3 up delay
Cut down delay
Cut up delay
Wheel down delay
Wheel up delay
Advanced Settings
Automatic repeat
Automatic return to origin
Gradient
Restoration of factory
settings
Return
Functions
To set the tools name
K3 tool cutting speed
Tangential tool cutting speed
Machine moving speed after tools lifting up.
The tools move down speed
Machine processing curve/circle speed
The cutter acceleration when it is working with the K3
tool
The machine move acceleration when it is working with
the knife tool
The machine move acceleration when it is travelling
without tools working
The tools move down acceleration speed
The machine delays in N millisecond before the K3 tool
drops down
The machine delays in N millisecond before the K3 tool
lifts
The machine delays in N millisecond before the knife tool
drops down
The machine delays in N millisecond before the knife tool
lifts
The machine delays in N millisecond before the wheel
tool drops down
The machine delays in N millisecond before the wheel
tool lifts up
Repeat the previous job automatically after activated
After finished the job, the machine automatically back to
the origin position
Gradient correction of the gantry
Restore all machine parameters to pre-factory settings
Return to the upper layer
- 70 -