TRENDnet TEW-658BRM User Manual page 63

Port Mapping — Check this box to enable port mapping.
To Create New Groups
37. Click the New button. An empty group appears on the table.
38. Click the radio button to select the empty group.
39. Add members to the group. To do so, select an interface from the Available
Interfaces panel. Then click the <- button to add the selected interface to the
Grouped Interfaces panel.
40. Repeat step 3 to add more members to the group.
41. Click the Apply button to save your changes.
To Modify Groups
42. Click the radio button to select the group to modify.
43. To add a group member or remove a member from the group, select the
interface, then click the <- or -> buttons.
44. Click the Apply button to save your changes.
To Delete Groups
Click the corresponding Delete button of the group to delete. The members of that
group automatically revert back to the Default group.