Port Mapping - TRENDnet TEW-658BRM User Manual

Check the Enable box of the LAN interface to enable the port.
Select the LinkMode from the drop-down list. Options are: Auto, 10Half, 10Full,
100Half, and 100Full.
Check the FlowCntrl box of the LAN interface to enable flow control.
Click the Apply button to save your changes.

Port Mapping

Port mapping allows you to group interfaces for traffic control. Traffic is isolated
from group to group. Therefore, traffic coming from an interface of a group can only
be flowed to the interfaces in the same group.
By default, all interfaces belong to the Default group. You can create new groups
and move interfaces to other groups. However, an interface can only be a member
of one group.
To access the Port Mapping page, click ADVANCED > Port Mapping.