Table of Contents
Advertisement
5. Select whether to enable or disable wireless connection. From this point, you
can also change the SSID with a name that you can easily remember. Click
Next to continue.
6. Select the Security Mode, Authentication Type, and Encryption, and enter a
passkey. Click Next to continue.
The screen below varies depending on the security mode you selected, below
is an example of a WEP security screen.
7. When prompted to reboot, click OK.
8. Log out from the web-based utility, then log in again to apply the
configurations.
- Quick Links:
- Log in to the Modem Router
Hide quick links:
Advertisement
Table of Contents
