DMZ — Check this box to enable DMZ.
DSL Interface — Select the DSL interface to activate DMZ from the drop-down list.
DMZ Host IP Address — Enter the IP address of the computer to set as the DMZ
host.
Check the Apply button to save and activate DMZ.
SPI Settings
SPI (Stateful Packet Inspection) filters more kinds of attacks by closely examining
packet data structures.
To access the SPI Settings page, click ADVANCED > Firewall > SPI Settings or click
the SPI Settings button.
SPI Enable — Select whether to enable or disable the SPI function.
Endpoint Filter — Select an endpoint filter option:
Independent: Forwards all incoming traffic from an open port to the
•
application that opened the port.
Restrict: Incoming traffic must match the IP address of the outgoing
•
connection.
Log Dropped Packet Enabled — Select whether to enable or disable logging of
dropped packets from your network or the Internet.
Click the Apply button to save and activate the SPI settings.