Mbssid Settings; Wireless Mac Filter - TRENDnet TEW-658BRM User Manual

Fragment Threshold — Fragment threshold refers to the maximum size of a packet
before data is fragmented into multiple packets. The default and recommended
value is 2346 bytes. If you experience a high packet error rate, you may slightly
adjust the value. Setting the fragment threshold too low may result in poor network
performance.
RTS Threshold — The default and recommended value is 2347. Should you
encounter inconsistent data flow, only slight modifications should be made.
Beacon Interval — Enter a value in milliseconds. A beacon is a packet that is sent
out by the Modem Router to synchronize the wireless network. The beacon interval
value indicates the frequency interval of the beacon. The default value is 100.
Click the Apply button to save your changes or click the Cancel button to discard
your changes.

MBSSID Settings

This page allows you to configure up to four virtual access points (VAP).
Click Advanced > Advanced Wireless > MBSSID Setting or click the MBSSID Setting
button.
Check the Enabled box of the VAP to enable it. If you enable a VAP, you can modify
its SSID and check its SSID Advertise box to allow wireless devices scanning for a
wireless network to detect the VAP.
Click the Apply button to save your changes or click the Cancel button to discard
your changes.

Wireless MAC Filter

This page allows you to deny or allow devices to access the wireless network by
filtering their MAC addresses.
Click Advanced > Advanced Wireless > Wireless MAC Filter or click the MAC Filter
button.