Table of Contents Table of Contents English ... 1. Before You Start 2. How to Install ... 3. Wireless Configuration ... Troubleshooting ... Version 07.31.2007...
2. How to Install Important! DO NOT install the USB adapter in the computer until instructed to do so. Note: Refer to the User's Guide on the Driver CD-ROM for Windows 98SE and Windows ME installation instructions 1. Insert the Utility & Driver CD- ROM into your computer's CD-ROM Drive and then click Install Utility.
5. Connect the wireless adapter to an available USB port on your computer. 6. Drivers will install automatically. Proceed to step 19. Windows XP 7. Click Continue Anyway. 8. Click Finish. 9. Connect the wireless adapter to an available USB port on your computer.
Page 6
10. Click No, not this time. Then click Next. 11. Select Install the software automatically and then click Next. 12. Click Continue Anyway. 13. Click Finish. Then proceed to step 19. English...
Windows 2000 14. Click Yes. 15. Click Finish. 16. Connect the wireless adapter to an available USB port on your computer. 17. Drivers will install automatically. 18. Click Yes. Then proceed to step 19. English...
Page 8
CD-ROM from your computer's CD-ROM drive. Your installation is now complete. For detailed information regarding the TEW-424UB configuration and advanced settings, please refer to the User's Guide included on the Utility & Driver CD-ROM or TRENDnet's website at www.trendnet.com To ensure the highest level of customer service and support, please take a moment to...
Connect. Wireless configuration is now complete. For detailed information regarding the TEW-424UB configuration and advanced settings, please refer to the User's Guide included on the Utility & Driver CD- ROM or TRENDnet's website at www.trendnet.com...
Please refer to the User's Guide included on the Driver CD-ROM. If you still encounter problems or have any questions regarding the TEW-424UB, please refer to the User's Guide included on the Utility & Driver CD-ROM or contact Trendnet's Technical Support Department.
Page 11
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
Need help?
Do you have a question about the TEW-424UB and is the answer not in the manual?
Questions and answers