1. Before You Start Package Contents Ÿ TFM-560X Ÿ CD-ROM (Driver & User’s Guide) Ÿ Multi-Language Quick Installation Guide Ÿ 1 x RJ-11 Telephone Cable Ÿ 1 x RS-232 Serial Cable Ÿ Power Adapter (9V AC, 1A) System Requirements Ÿ...
Page 4
2. How to Install Note: 1.Refer to the User's Guide on the Driver CD-ROM for Windows 98SE and Windows ME installation instructions 1. Insert Driver CD-ROM into your computer's CD-ROM drive. 2. Click Run Autorun.exe (Windws 7/Vista only). 3. Click Install Driver. Then select your operating system.
Page 5
6. Shutdown your computer. 7. Plug the male end of the RS-232 cable into the TFM-560X. Then plug the female end of the RS-232 cable into your computer's COM port. 8. Plug one end of a RJ-11 telephone cable into the LINE port on the Modem, and then connect the other end into the telephone jack.
Note: For Windows 7/2000 drivers will install automatically. Driver installation for Windows 7/2000 is now complete. For Windows Vista, continue on to step 13. For Windows XP, continue on to step 15. Windows Vista 13. Click Locate and install driver software (recommended).
Page 7
16. Select Install the software automatically (Recommended) and then click Next. 17. Select the Windows XP drivers and then click Next. 18. Click Continue Anyways. 19. Click Finish. Note: Driver installation for Windows XP is now complete.
Page 8
2. Verify that the modem is properly connected to the computer's RS-232 port. 3. Try connecting the modem into a different RS-232 port. 3. After successful installation of the TFM-560X, I tried to connect to the Internet but I do not get a dial tone. What should I do? 1.