TRENDnet TEW-436BRM User Manual
  1. Manuals
  2. Brands
  3. TRENDnet Manuals
  4. Modem
  5. TEW-436BRM
  6. User manual
TRENDnet TEW-436BRM User Manual

TRENDnet TEW-436BRM User Manual

Ieee 54mbps wireless g 2/2+ adsl modem router
Hide thumbs Also See for TEW-436BRM:
Table of Contents

Advertisement

Quick Links

Download this manual
i

Advertisement

Table of Contents
loading

Related Manuals for TRENDnet TEW-436BRM

Summary of Contents for TRENDnet TEW-436BRM

  • Page 2 Regulatory notes and statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions however are far much less than the electromagnetic energy emissions from wireless devices like for example mobile phones.
  • Page 3 PART 68 statement This equipment complies with Part 68 of FCC Rules and the requirements adopted by the ACTA.. On the bass unit of this equipment is a label that contains, among other information, a product identifier in the format US: TI1DL01BTEW436BRM. If requested, this number must be provided to the telephone company.
  • Page 4 TEW-436BRM vastavust direktiivi 1999/5/EÜ põhinõuetele ja Eesti [Estonian] nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. Hereby, TRENDnet , declares that this TEW-436BRM is in compliance with the essential requirements and other English relevant provisions of Directive 1999/5/EC. Por medio de la presente TRENDnet declara que el TEW-436BRM cumple con los requisitos esenciales y Español [Spanish]...

  • Page 5: Table Of Contents

    TABLE OF CONTENT ..................1 BOUT UIDE Purpose ......................................... 1 Terms/Usage ......................................1 Overview of this User’s Guide ................................1 ................... 2 NTRODUCTION Applications: ......................................2 Supported Features: ....................................2 Wireless Performance Considerations ..............................3 ................4 NPACKING AND ETUP Unpacking ......................................
  • Page 6 Port Forwarding ....................................43 URL Blocking ....................................45 Domain Blocking .................................... 46 Port Triggering ....................................47 DMZ........................................ 48 Advance – Used only on Router mode settings ..........................49 Wireless ......................................49 Dynamic DNS ....................................53 Bridging ......................................55 Routing ......................................56 IGMP Proxy ....................................

  • Page 7: About This Guide

    ABOUT THIS GUIDE Congratulations on your purchase of this 54Mbps Wireless G 2/2+ ADSL Modem Router. This integrated access device combines ADSL modem, Internet gateway functions with wireless LAN and Fast Ethernet switch. It provides a complete solution for Internet surfing and office resource sharing, and it is easy to configure and operate for every user.

  • Page 8: Introduction

    INTRODUCTION The 54Mbps Wireless G ADSL 2/2+ Modem Router (model TEW-436BRM) is an all-in-one modem and wireless g router. No need to buy a separate modem and router. This sleek device provides an ADSL 2/2+ modem, wireless g router and 4-port switch, all in a single product.

  • Page 9: Wireless Performance Considerations

    Wireless Performance Considerations There are a number of factors that can impact the range of wireless devices. 1. Adjust your wireless devices so that the signal is traveling in a straight path, rather than at an angle. The more material the signal has to pass through the more signal you will lose.

  • Page 10: Unpacking And Setup

    Unpacking Open the box of the WLAN ADSL Router and carefully unpack it. The box should contain the following items: TEW-436BRM 54Mbps Wireless G 2/2+ ADSL Modem Router CD-Rom (User’s Guide) External power adapter 1 1.5m (5ft) Cat.5 Ethernet Cable...

  • Page 11: Hardware Installation

    HARDWARE INSTALLATION Front Panel The figure below shows the front panel of the IEEE 802.11b/g Wireless ADSL Router. Front Panel LED Indicators Color State Description Green Solid on Power on, normal operation. Power on, self-test failed, indicating device Solid on Power malfunction.
  • Page 12 Wireless disabled. Blinking WPS in progress. Green Solid on WPS success. Solid on WPS fail. WPS disabled.

  • Page 13: Rear Panel

    Rear Panel The figure below shows the rear panel of the IEEE 802.11b/g Wireless ADSL Router. Rear Panel Antenna One 2dBi gain antenna for wireless connection. LAN (1-4) Four RJ-45 10/100Mbps Auto-MDIX ports for connecting to either 10Mbps or 100Mbps Ethernet connections. DSL (ADSL Port) Connect to an active telephone line (RJ-11).

  • Page 14: Hardware Connections

    Hardware connections Connecting the WLAN ADSL Router 1. Connect ADSL Cable Connect the supplied RJ-11 ADSL cable from to the DSL port on the Wireless ADSL Router (the RJ11 connector) to the ADSL terminator provided by your phone company. 2. Connect LAN Cables Use standard LAN cables to connect PCs to the LAN ports on the Wireless ADSL Router.

  • Page 15: Pc Network Tcp/Ip Setting

    PC NETWORK TCP/IP SETTING The network TCP/IP settings differ based on the computer’s operating system (Win95/98/ME/NT/2000/XP/Vista) and are as follows. Windows 95/98/ME 1. Click on the “Network neighborhood” icon found on the desktop. 2. Click the right mouse button and a context menu will be show. 3.

  • Page 16: Windows 2000

    6. Select “None” for the “Gateway address” field. Windows 2000 Double click on the “My Computer” icon on the desktop. When “My Computer” window opens, open the “Control Panel” and then open the “Network dialup connection” applet. Double click on the “Local area network connection” icon. Select “Properties”...

  • Page 17: Windows Xp / Vista

    Windows XP / Vista Point the cursor and click the right button on the “My Network Place” icon. Select “properties” to enter the TCP/IP setting window. 1. Set “IP address” to “Obtain an IP address automatically.” 2. Set “DNS” to “Obtain DNS server address automatically.”...

  • Page 18: Configuration

    CONFIGURATION First make sure that the network connections are functioning normally. This WLAN Router can be configured using Internet Explorer 5.0 or newer web browser versions. Login to the WLAN ADSL Router through Wireless LAN Before configuring the WLAN ADSL Router through WLAN, make sure that the SSID, Channel and the WEP is set properly.
  • Page 19 3. When the following dialog box appears, enter the user name and password to login to the main configuration window, the default username and password is “admin”. After entering the user name and password, the main page comes up, the screen will display the WLAN ADSL Router status.

  • Page 20: Configuration Menu

    Configuration Menu When the main page appears, find the Configuration menu in the left side of the screen. Click on the setup item that you want to configure. There are ten options: Setup Wizard, Status, Setup, Firewall (form router mode only), Advance (form router mode only), Maintenance, Diagnostic, Monitoring, Mode and Reboot as shown in the Configuration Menu screen.

  • Page 21: Setup Wizard

    SETUP WIZARD Setup wizard is provided as part of the web configuration utility. User can simply follow the step-by-step process to get the WLAN ADSL Router configuration ready by clicking on` the “Wizard” button on the function menu. The following screen will appear.

  • Page 22: Step 2: Adsl Setting

    Step 2: ADSL Setting VPI: Enter the VPI value provided by ISP VCI: Enter the VCI value provided by ISP Encapsulation: Select the encapsulation type for LLC or VC-Mux ADSL modulation: Select the ADSL modulation type defined by your ISP Step 3: Select Channel Mode Select the type of network protocol for 1483 Bridged, 1483 MER, PPPoE, PPPoA or 1483 Routed.
  • Page 23 1483 Bridged Selected the 1483 Bridged mode then click next button, the WLAN ADSL Router will save configuration and reboot the WLAN ADSL Router. When rebooted the WLAN ADSL Router, enabled the “Test Internet Connection” then click finish button for test Internet connection; click close button close the setup wizard.
  • Page 24 1483 MER Selected the 1483 MER mode then click next button, continuing the WAN IP setting. Select whether user wants to specify an IP address manually, or want DHCP to obtain an IP address automatically.
  • Page 25 If selected to 1483 MER mode with DHCP, the follows step will going on: Click next button to save configuration and reboot the WLAN ADSL Router When rebooted the WLAN ADSL Router, enabled the “Test Internet Connection” then click finish button for test Internet connection; click close button close the setup wizard.
  • Page 26 If selected to 1483 MER mode with Fixed IP, the follows step will going on: Enter the Local IP Address, Gateway IP Address, Subnet Mask and Wan MAC (if need to specify the other Wan MAC address) in the text boxes, click next button to continue the DNS server setting.
  • Page 27 When rebooted the WLAN ADSL Router, enabled the “Test Internet Connection” then click finish button for test Internet connection; click close button close the setup wizard. PPPoE/PPPoA Selected the PPPoE or PPPoA mode then click next button, continue the account setting.
  • Page 28 Click next button to save configuration and reboot the WLAN ADSL Router...
  • Page 29 When rebooted the WLAN ADSL Router, enabled the “Test Internet Connection” then click finish button for test Internet connection; click close button close the setup wizard. 1483 Routed Selected the 1483 Routed mode then click next button, continuing the WAN IP setting.
  • Page 30 Setting the DNS server assigned by DHCP or manually, click next button to save configuration and reboot the WLAN ADSL Router.
  • Page 31 1577 Routed Selected the 1577 Routed mode then click next button, continuing the WAN IP setting. Select whether user wants to specify an IP address manually, or want DHCP to obtain an IP address automatically.
  • Page 32 If selected to 1577 Routed mode with DHCP, the follows step will going on: Click next button to save configuration and reboot the WLAN ADSL Router When rebooted the WLAN ADSL Router, enabled the “Test Internet Connection” then click finish button for test Internet connection; click close button close the setup wizard.
  • Page 33 If selected to 1577 Routed mode with Fixed IP, the follows step will going on: Enter the Local IP Address, Gateway IP Address, Subnet Mask and Wan MAC (if need to specify the other Wan MAC address) in the text boxes, click next button to continue the DNS server setting.

  • Page 34: Step 4: Completed The Setup Wizard

    Step 4: Completed the Setup Wizard When rebooted the WLAN ADSL Router, enabled the “Test Internet Connection” then click finish button for test Internet connection; click close button close the setup wizard.

  • Page 35: Manual Setings

    MANUAL SETINGS Find that there are ten items, including Setup Wizard, Status, Setup, Firewall (form router mode only), Advance (form router mode only), Maintenance, Diagnostic, Monitoring, Mode and Reboot in Setup menu. Status This page displays the WLAN ADSL Router current status and settings. Click the “Refresh”...
  • Page 36 VPI: Virtual Path Identifier. Enter the VPI value provided by ISP. VCI: Virtual Channel Identifier. Ethernet the VCI value provided by ISP. Encapsulation: Select the encapsulation type LLC or VC-Mux produced by your ISP. Channel Mode: Select the channel mode for 1483 Bridged, 1483 MER, PPPoE, PPPoA, 1483 Routed or 1577 Routed provide by ISP.

  • Page 37: Lan Setup

    Idle Time: Enter the idle time for Connect on Daemon, when no Internet access during the idle time, the ADSL connection will auto disconnect. WAN IP Settings: Type: Select whether user wants to specify an IP address manually, or want DHCP to obtain an IP address automatically.

  • Page 38: Wireless

    IP Address: This is the IP address of the router. The default IP address is 192.168.10.1. Subnet Mask: Type the subnet mask for the router in the text box. The default subnet mask is 255.255.255.0. Secondary IP: Checked to enable the secondary IP address setting on the LAN. IP Address: The secondary IP address setting of the LAN.
  • Page 39 Basic Settings This page allow user to enable and disable the wireless LAN function, create a SSID, and select the channel for wireless communications. Disable: Checked to disable the wireless function of the WLAN ADSL Router. Band: Select one of the following: 2.4Ghz (B+G) - Selected if you are allowing both 802.11b and 802.11g wireless clients connect to the WLAN ADSL Router at the same time.
  • Page 40 SSID TYPE: The WLAN ADSL Router supports up to four multiple SSID feature (Multiple Virtual AP), select which AP (Root AP, VAP0~VAP3) will configure the security setting. Encryption: There are 4 types of security to be selected. To secure your WLAN, it’s strongly recommended to enable this feature.
  • Page 41 SSID TYPE: The WLAN ADSL Router supports up to four multiple SSID feature (Multiple Virtual AP), select which AP (Root AP, VAP0~VAP3) will setting the WEP key. Key Length: Select the level of encryption from the drop-down list 64 and 128- bit encryption.
  • Page 42 Pre-Shared Key: Specify the shared secret used by this Pre-Shared Key. If the “Pre-Shared Key Format” is specified as Passphrase, then it indicates a passphrase of 8 to 63 bytes long; or if the “Pre-Shared Key Format” is specified as Passphrase, then it indicates a 64-hexadecimal number.
  • Page 43 Disable WPS: Checked to disable the Wi-Fi protected Setup. WPS Status: When the WLAN ADSL Router settings are factory default (out of box), it is set to open security and un-configured state. “WPS Status” will display it as “UnConfigured”. If it already shows “Configured”, some registrars such as Vista WCN will not configure AP.

  • Page 44: Dhcp Settings

    DHCP Settings You can configure your WLAN ADSL Router to use the Dynamic Host Configuration Protocol (DHCP). This section provides DHCP instructions for implementing it on your network by selecting the role of DHCP protocol that this device wants to play. DHCP Mode: There are two different DHCP roles that this device can act as: DHCP Server and DHCP Relay.
  • Page 45 IP Pool Range: Specify the lowest and highest addresses in the pool. Subnet Mask: Specify the subnet mask value. Max Lease Time: The Lease Time is the amount of time that a network user is allowed to maintain a network connection to the device using the current dynamic IP address.

  • Page 46: Time Zone

    MAC-Base Assignment: Click the “MAC-Base Assignment” button to configure the static IP base on MAC Address. You can assign/delete the static IP. The Host MAC Address, please input a string with hex number. Such as "00-d0- 59-c6-12-43". The Assigned IP Address, please input a string with digit. Such as "192.168.10.100".

  • Page 47: Firewall - Used Only On Router Mode Settings

    Time Zone Select: The time zone in which the WLAN ADSL Router resides. Enable SNTP client update: Enable the SNTP client to update the system clock. SNTP server: The IP address or the host name of the SNTP server. You can select from the list or set it manually.

  • Page 48: Mac Filtering

    Add/Modify Rule Add or modify the IP/Port filtering rule. Direction: Select the traffic forwarding direction “Outgoing” or “Incoming”. Protocol: Select the protocol type for TCP, UDP or ICMP. Rule Action: Deny or allow traffic when matching this rule. Source: The source IP address, Subnet Mask and Port range assigned to the traffic on which filtering is applied.

  • Page 49: Port Forwarding

    Add/Modify Rule Add or modify the MAC filtering rule. Rule Action: Deny or allow traffic when matching this rule. Source: The source MAC address. It must be xxxxxxxxxxxx format. Blanks can be used in the MAC address space and are considered as don’t care. Add: Click the “Add”...
  • Page 50 Add/Modify Rule Add or modify the Port Forwarding rule. Protocol: Select the protocol type for TCP, UDP or Both (TCP and UTP). Enable: Check to enable this rule. Interface: Select the WAN interface on which the port-forwarding rule is to be applied.

  • Page 51: Url Blocking

    URL Blocking The URL Blocking is the web filtering solution. The firewall includes the ability to block access to specific web URLs based on string matches. This can allow large numbers of URLs to be blocked by specifying only a FQDN (such as tw.yahoo.com).

  • Page 52: Domain Blocking

    Add Keyword Rule Rule Action: Deny or allow traffic when matching this rule. Keyword: The filtered keyword such as yahoo. If the URL includes this keyword, the URL will be blocked to access. Add: Click the “Add” button to save the rule entry to the configuration. Delete Selected: Click the “Delete Selected”...

  • Page 53: Port Triggering

    Add Rule Rule Action: Deny or allow traffic when matching this rule. Domain: Enter the blocked domain. Add: Click the “Add” button to save the rule entry to the configuration. Delete Selected: Click the “Delete Selected” button to delete the selected rule from Domain Block Table.

  • Page 54: Dmz

    Match port range: Enter the outgoing port range that can be used to access the application in the text boxes. Related Protocol: Select the incoming protocol type for TCP, UDP or TCP&UTP. Related port range: Enter the incoming port range that can be used to access the application in the text boxes.

  • Page 55: Advance - Used Only On Router Mode Settings

    DMZ Host: Select to enable or disable the DMZ feature. DMZ Host IP Address: Enter a IP address of the local host. This feature sets a local host to be exposed to the Internet Advance – Used only on Router mode settings The Advance setting is for the WLAN ADSL Router is configured on Router mode only.
  • Page 56 Fragment Threshold: This value should remain at its default setting of 2000. It specifies the maximum size for a packet before data is fragmented into multiple packets. If you experience a high packet error rate, you may slightly increases the “Fragment Threshold”...
  • Page 57 Relay Blocking: Select to enable or disable the Relay Blocking feature. When Relay Blocking is enabled, wireless clients will not be able to directly access other wireless clients. WMM support: Select to enable or disable the WMM (Wi-FI Multimedia) QoS feature.
  • Page 58 Delete Selected: Click the “Delete Selected” button to delete the selected rule from Current Access Control List. Delete All: Click the “Delete All” button to delete the all of rule in the Current Access Control List. MBSSID The WLAN ADSL Router supports up to four virtual AP (Vap0~Vap3) setting allows wireless users connect up to the WLAN ADSL Router through up to four different WLAN SSID and security settings.

  • Page 59: Dynamic Dns

    do not. IEEE 802.11 Shared Key authentication accomplishes this without the need to transmit the secret key in clear. Requiring the use of the WEP privacy mechanism. Auto: Auto is the default authentication algorithm. It will change its authentication type automatically to fulfill client’s requirement. Wireless Isolation: Select to enable or disable the Wireless Isolation feature.
  • Page 60 DynDns Settings: Enter the username and password for your registered DynDNS account. TZO Settings: Enter the email address and key for your registered TZO account.

  • Page 61: Bridging

    Bridging This page is used to configure the bridge parameters. Here you can change the settings or view some information on the bridge and its attached ports. Aging Time: Set the Ethernet address ageing time, in seconds. After [Ageing Time] seconds of not having seen a frame coming from a certain address, the bridge will time out (delete) that address from Forwarding DataBase (fdb).

  • Page 62: Routing

    Routing The Routing page enables you to define specific route for your Internet and network data. Most users do not need to define routes. On a typical small home or office LAN, the existing routes that set up the default gateways for your LAN hosts and for the WLAN ADSL Router provide the most appropriate path for all your Internet traffic.
  • Page 63 specified as all zeros to indicate that this route should be used for all destinations for which no other route is defined (this is the route that creates the default gateway). Subnet Mask: The network mask of the destination subnet. The default gateway uses a mask of 0.0.0.0.

  • Page 64: Igmp Proxy

    IGMP Proxy IGMP proxy enables the system to issue IGMP host messages on behalf of hosts that the system discovered through standard IGMP interfaces. The system acts as a proxy for its hosts when you enable it by doing the follows: Enable IGMP proxy on WAN interface (upstream), which connects to a router running IGMP.

  • Page 65: Rip

    configuration of the application. For Device Identification, the application will send a description of the WLAN ADSL Router as a control point back to the host making the request. UPnP: Select to enable or disable the UPnP feature on the WLAN ADSL Router. WAN Interface: Select WAN interface that will use UPnP from the drop-down lists.

  • Page 66: Snmp

    RIP: Select to enable or disable the RIP feature on the WLAN ADSL Router. Receive Mode: Select which RIP version to be used for RIP listening, RIP1, RIP2 or Both (RIP1+RIP2), Selected None to disable the RIP listening. Send Mode: Select which RIP version to be used for RIP sending, RIP1, RIP2 or Both (RIP1+RIP2), Selected None to disable the RIP sending.

  • Page 67: Port Mapping

    Trap IP Address: Destination IP address of the SNMP trap. Community name: Read-only: Name of the read-only community. This read-only community allows read operation to all objects in the MIB. Write-only: Name of the write-only community. This write-only community allows write operation to the objects defines as read-writable in the MIB. Port Mapping The WLAN ADSL Router provides multiple interface groups.

  • Page 68: Ip Qos

    IP QoS The WLAN ADSL Router provides a control mechanism that can provide different priority to different users or data flows. The QoS is enforced by the QoS rules in the QoS table. A QoS rule contains two configuration blocks: Traffic Classification and Action.

  • Page 69: Remote Access

    Outbound Priority: The priority level for the traffic that matches this classification rule. The possible selections are (in the descending priority): p0, p1, p2, p3. 802.1p: Select this field to mark the 3-bit user-priority field in the 802.1p header of the packet that match this classification rule.

  • Page 70: Atm Settings

    WAN: Checked the services on the WAN column to allows the services access from WAN side. WAN Port: This field allows the user to specify the port of the corresponding service. Take the HTTP service for example; when it is changed to 8080, the HTTP server address for the WAN side is http://dsl_addr:8080, where the dsl_addr is the WAN side IP address of the WLAN ADSL Router.

  • Page 71: Adsl Settings

    nrt-VBR (non-real-time Variable Bit Rate): When nrt-VBR is selected, the SCR and MBS fields are enabled. rt-VBR (real-time Variable Bit Rate): When rt-VBR is selected, the SCR and MBS fields are enabled. PCR: Peak Cell Rate, measured in cells/sec., is the cell rate which the source may never exceed.
  • Page 72 ADSL modulation: Choose preferred xDSL standard protocols, defined by ISP. G.lite: G.992.2 Annex A G.dmt: G.992.1 Annex A T1.413: T1.413 issue #2 ADSL2: G.992.3 Annex A ADSL2+: G.992.5 Annex A AnnexL Option: Checked to Enable the ADSL2/ADSL2+ Annex L capability. AnnexM Option: Checked to Enable the ADSL2/ADSL2+ Annex M capability.

  • Page 73: Maintainance

    Maintainance Backup/Restore This page allows you to backup current settings to a file or restore the settings from the file which was saved previously. Besides, you could reset the current configuration to factory default. Save Setting to File: Click the “Save Setting to File” button to save current settings of the WLAN ADSL Router to local computer.
  • Page 74 User Name: Selection of user levels are: admin and user. Old Password: Enter the old password for this selected login. New Password: Enter the new password here. Confirmed Password: Enter the new password here again to confirm.

  • Page 75: Upgrade Firmware

    Upgrade Firmware This page allows you to upgrade the WLAN ADSL Router firmware. Please note, do not power off the device during the upgrade process. It may crash the system. To upgrade the firmware for the DSL device: Click the Browse button to select the firmware file. Confirm your selection.

  • Page 76: Access Controls

    Access Controls The Access Control List (ACL) is a list of permissions attached to the WLAN ADSL Router. The list specifies who is allowed to access this device. If ACL is enabled, all hosts cannot access this device except for the hosts with IP address in the ACL table.

  • Page 77: Tr-069 Config

    TR-069 Config TR-069 is a protocol for communication between a CPE and Auto-Configuration Server (ACS). The CPE TR-069 configuration should be well defined to be able to communicate with the remote ACS. TR069: Enable or Disable the TR-069 feature on the WLAN ADSL Router. URL: Enter the ACS URL here.

  • Page 78: Logout

    Connection Request User Name: The username the remote ACS should use when connecting to this device. Password: The password the remote ACS should use when connecting to this device. Path: The path of the device ConnectionRequestURL. The device ConnectionRequestURL should be configured based on the Device_IP, Path and Port as follows: http://Device_IP:Port/Path.

  • Page 79: Diagnostic

    Diagnostic Ping Once you have your WLAN ADSL Router configured, it is a good idea to make sure you can ping the network. A ping command sends a message to the host you specify. If the host receives the message, it sends messages in reply. To use it, you must know the IP address of the host you are trying to communicate with and enter the IP address in the Host Address field.

  • Page 80: Atm Loopback

    ATM Loopback In order to isolate the ATM interface problems, you can use ATM OAM loopback cells to verify connectivity between VP/VC endpoints, as well as segment endpoints within the VP/VC. ATM uses F4 and F5 cell flows as follows: F4: used in VPs.

  • Page 81: Adsl

    ADSL This page shows the ADSL diagnostic result. Click “Start” button to start the ADSL diagnostic. Diagnostic Test The Diagnostic Test page shows the test results for the connectivity of the physical layer and protocol layer for both LAN and WAN sides. Select Internet Connection: The available WAN side interfaces are listed.

  • Page 82: Monitoring

    Monitoring DHCP Clients This table shows the assigned IP address, MAC address and time expired for each DHCP leased client. Routing Table This table shows a list of destination routes commonly accessed by your network.

  • Page 83: Arp Table

    ARP Table This table shows a list of learned MAC addresses. Bridge FDB Table This table shows a list of learned MAC addresses for this bridge.

  • Page 84: Interface Statistics

    Interface Statistics This page shows the packet statistics for transmission and reception regarding to network interface. ADSL Statistics This page shows the packet statistics for transmission and reception regarding to the ADSL.

  • Page 85: Mode

    Mode This page explains configuration and operation when in "Router" or "Modem" mode. Device Mode: There are two modes available on the Mode screen. Router: Both the ADSL Modem and the Router features are operational. In this mode, this device can provide shared Internet Access to all your LAN users.

  • Page 86: Reboot

    Reboot Click "Commit and Reboot" button to apply setting changes and to reboot the WLAN ADSL Router.

  • Page 87: Technical Specifications

    TECHNICAL SPECIFICATIONS General Standards Compliant with ADSL standards: ANSI T1.413 Issue2, G.992.1 (G.dmt, Annex A), G.992.2 (G.lite) Compliant with ADSL2 standard: G.992.3 (G.dmt.bis) Compliant with ADSL2+ standard: G.992.5 Annex A IEEE 802.11b & 802.11g Wireless LAN IEEE 802.3u 10/100Base TX Fast Ethernet Protocol WLAN: CSMA/CA...
  • Page 88 Physical and Environmental DC inputs 12VDC 1A Power 6.5watts (max) Consumption Temperature Operating: 0 C ~ 40 C, Storage: -10 ~ 70 Humidity Operating: 10% ~ 90%, Storage: 5% ~ 90% Dimensions 195 x 120 x 30mm EMI: FCC part 15, FCC part 68, CE...

  • Page 89: Limited Warranty

    LIMITED WARRANTY TRENDnet  warrants  its  products  against  defects  in  material  and  workmanship,  under  normal  use  and  service,  for  the  following lengths of time from the date of purchase.                TEW‐436BRM – 3 Years Warranty  AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.    If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at  its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer.  The  repair/replacement  unit’s  warranty  continues  from  the  original  date  of  purchase.  All  products  that  are  replaced ...
  • Page 90 AT  TRENDNET’S  OPTION.  THIS  DISCLAIMER  OF  LIABILITY  FOR  DAMAGES  WILL  NOT  BE  AFFECTED  IF  ANY  REMEDY  PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.    Governing Law: This Limited Warranty shall be governed by the laws of the state of California.    Some TRENDnet products include software code written by third party developers. These codes are subject to the GNU  General Public License ("GPL") or GNU Lesser General Public License ("LGPL").     Go to http://www.trendnet.com/gpl or http://www.trendnet.com Download section and look for the desired TRENDnet  product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to  the  copyrights  of  the  developers.  TRENDnet  does  not  provide  technical  support  for  these  codes.  Please  go ...

Table of Contents