Firewall; Mac Filter; Ip Filter - TRENDnet TEW-658BRM User Manual

Firewall

MAC Filter

This page allows you to set up a list of MAC addresses which will be allowed or
restricted to access the Internet.
To access the MAC Filter page, click ADVANCED > Firewall > MAC Filter or click the
MAC Filter button.
MAC Address Control — Check this box to enable the MAC filter function.
Control Action — Select Allow to allow a specified MAC address to access the
Internet or Deny to restrict a specified MAC address access to the Internet.
Click the Apply button to save and activate the MAC filter or click the Cancel button
to discard your changes.
MAC Address — Enter the MAC address of the device you want to allow or deny
access to the Internet. To use the MAC address of the DHCP client, click the Clone
button. The MAC address is automatically copied to the MAC address field. Click the
Add button to add the MAC address to the filter list.
The MAC ADDRESS CONTROL LIST displays the MAC address of the devices that are
either allowed or denied access to the Internet. To remove an entry from the list,
click the corresponding button.

IP Filter

This page allows you to create filter rules to control outgoing traffic to the Internet
based on a range of IP addresses and their protocols.
To access the IP Filter page, click ADVANCED > Firewall > IP Filter or click the IP
Filter button.