Table of Contents Table of Contents English ..................... 1. Before You Start ................How to Install ..................3. Verify Installation ................Troubleshooting ..................Version 04.27.2006...
1. Before You Start Package Content TFM-560U Driver CD-ROM Quick Installation Guide RJ-11 Telephone Cable System Requirements CD-ROM Drive CPU: Intel Pentium 233 MHz or above Memory: 32MB or above Hard Drive Space: 4MB or above USB Port: 1.1 or 2.0 Windows 2003 Server/XP/2000/ME/98SE Application Workstation with 56K (V.92)
2. How to Install Note: Refer to the User's Guide on the Driver CD-ROM for Windows 98SE and Windows ME installation instructions Windows 2003 Server/XP/2000 1. Remove the TFM-560U USB cap and then connect the modem to an available USB 2.0 or 1.1 port on the computer.
5. Click OK. Windows 2003 Server/XP 6. Click Continue Anyway. Windows 2000 7. Click Yes. English...
Page 6
8. Connect a telephone cable from the modem to a phone jack. Your installation is now complete. For detailed information regarding the TFM-560U configuration and advanced settings, please refer to the User's Guide included on the Driver CD-ROM or TRENDnet's website at www.trendnet.com English...
4. Verify Installation 3. Verify Installation Windows 2003 Server/XP/2000 1. Right-click My Computer and click Properties. Under the Hardware tab, click Device Manager. 2. Expand the “Modems” heading to verify that the Agere Systems USB 2.0 Soft Modem has been installed and that no question marks or exclamation points are visible.
Please refer to the User's Guide included on the Driver CD-ROM. If you still encounter problems or have any questions regarding the TFM-560U, please refer to the User's Guide included on the Driver CD-ROM or contact Trendnet's Technical Support Department.