Basic Settings
This page allow user to enable and disable the wireless LAN function, create a
SSID, and select the channel for wireless communications.
Disable: Checked to disable the wireless function of the WLAN ADSL Router.
Band: Select one of the following:
2.4Ghz (B+G) - Selected if you are allowing both 802.11b and 802.11g
wireless clients connect to the WLAN ADSL Router at the same time.
2.4Ghz (B) - Selected if you are allowing the 802.11b wireless clients connect
to the WLAN ADSL Router only.
2.4Ghz (G) - Selected if you are allowing the 802.11g wireless clients
connect to the WLAN ADSL Router only.
SSID: Type an SSID in the text box. The SSID of any wireless device must match
the SSID typed here in order for the wireless device to access the LAN and WAN
via the WLAN ADSL Router.
Channel: Select a transmission channel for wireless communications. The channel
of any wireless device must match the channel selected here in order for the
wireless device to access the LAN and WAN via the WLAN ADSL Router.
Radio Power (mW): The maximum output power for wireless LAN: 15mW,
30mW or 60mW.
Associated Clients: Click the "Show Active Client" button displays the
information of connected wireless clients.
Security
33