Table of Contents
Advertisement
Idle Time: Enter the idle time for Connect on Daemon, when no Internet access
during the idle time, the ADSL connection will auto disconnect.
WAN IP Settings:
Type: Select whether user wants to specify an IP address manually, or want
DHCP to obtain an IP address automatically. When Fixed IP is selected, type the
Local IP Address, Gateway IP Address and Subnet Mask in the text boxes. User's
ISP will provide with this information.
Unnumbered: Checked to enable the IP unnumbered on the WLAN ADSL
Router.
Default Route: Setting the default router function disable or enable.
WAN MAC: Enter the specified WAN MAC address provided by your ISP
DNS Setting:
Attain DNS Automatically: Select this item if you want to use the DNS servers
obtained by the WAN interface via the auto-configuration mechanism.
Set DNS Manually: Select this item to configure up to three DNS IP addresses.
DNS 1~3: Ethernet the IP address of the DNS server.
Add Button: Click add button to add the new VC setting to the ATM VC Table.
Modify Button: Selected on of VC setting from the Current ATM VC Table then
click the Modify button to save the modified VC setting.
Current ATM VC Table: Shows all of the ATM VC settings in the table.
Auto-PVC Search: Enable the Auto-PVC Search or add new PVC setting
manually.
Current Auto-PVC Table: Shows all of the Auto-PVC settings in the table.
LAN Setup
This screen enables users to set up the WLAN ADSL Router WAN connection,
specify the IP address for the WAN, add DNS numbers, and enter the MAC address.
31
Advertisement
Table of Contents
