Configuration; Login To The Wlan Adsl Router Through Wireless Lan; Login To The Wlan Adsl Router; Using The Web Browser - TRENDnet TEW-436BRM User Manual

Ieee 54mbps wireless g 2/2+ adsl modem router

Hide thumbs Also See for TEW-436BRM:

Table of Contents

CONFIGURATION

First make sure that the network connections are functioning normally.

This WLAN Router can be configured using Internet Explorer 5.0 or newer web

browser versions.

Before configuring the WLAN ADSL Router through WLAN, make sure that the

SSID, Channel and the WEP is set properly.

The default setting of the WLAN ADSL Router that you will use:

SSID: TRENDnet436

Channel: Auto

802.11 Mode: 802.11b+g mixed mode

Security: disable

IP Address: 192.168.10.1

VPI/VCI for ATM: 5/35

ADSL Line mode: Auto-detect

Before you configure this device, note that when the WLAN ADSL Router, make

sure the host PC must be set on the IP subnet that can be accessed by the

xDSL/Cable modem. For example, when the default network address of the

xDSL/Cable modem Ethernet interface is 192.168.10.x, then the host PC should be

set at 192.168.10.xxx (where xxx is a number between 2 and 254), and the default

subnet mask is 255.255.255.0.

1. Open Internet Explorer 6.0 or above Internet browser.

2. Enter IP address

the URL web address location.

http://192.168.10.1

(the factory-default IP address setting) to

Table of Contents