Table of Contents
Advertisement
Add/Modify Rule
Add or modify the Port Forwarding rule.
Protocol: Select the protocol type for TCP, UDP or Both (TCP and UTP).
Enable: Check to enable this rule.
Interface: Select the WAN interface on which the port-forwarding rule is to be
applied.
Local: The local IP address and Port range assigned to the traffic on which filtering
is applied.
Destination: The remote IP address and Port range assigned to the traffic on which
filtering is applied.
Add: Click the "Add" button to save the rule entry to the configuration.
Modify: Click the "Modify" button to modify the selected rule form the Current
Port Forwarding Table.
Delete Selected: Click the "Delete Selected" button to delete the selected rule from
Current Port Forwarding Table.
Delete All: Click the "Delete All" button to delete the all of rule in the Current Port
Forwarding Table.
44
Advertisement
Table of Contents
