Table of Contents
Advertisement
RIP: Select to enable or disable the RIP feature on the WLAN ADSL Router.
Receive Mode: Select which RIP version to be used for RIP listening, RIP1, RIP2
or Both (RIP1+RIP2), Selected None to disable the RIP listening.
Send Mode: Select which RIP version to be used for RIP sending, RIP1, RIP2 or
Both (RIP1+RIP2), Selected None to disable the RIP sending.
Delete Selected: Click the "Delete Selected" button to delete the selected RIP
config from RIP Config Table.
Delete All: Click the "Delete All" button to delete the all of rule in the RIP config
from RIP Config Table.
SNMP
Simple Network Management Protocol (SNMP) is a troubleshooting and
management protocol that uses the UDP protocol on port 161 to communicate
between clients and servers. The DSL device can be managed locally or remotely
by SNMP protocol.
SNMP: Enable or Disable the SNMP feature on the WLAN ADSL Router.
System Description: System description of the WLAN ADSL Router.
System Contact: Contact person and/or contact information for the WLAN ADSL
Router.
System Name: An administratively assigned name for the WLAN ADSL Router.
System Location: The physical location of the WLAN ADSL Router.
System Object ID: Vendor Object Identifier. The vendor's authoritative
identification of the network management subsystem contained in the entity.
60
Advertisement
Table of Contents
