Advertisement
Quick Links
MAN#650217
Kit Includes:
Installation:
1. Remove the two screws and lens on each tail light.
2. Remove the light bulb from socket.
3. Carefully remove the gasket from the housing. If the gasket is hard or brittle it should be
replaced.
4. Now is a good time to clean or replace the lenses and housings if necessary. If the lenses are
in poor condition a replacement set is recommended.
INSTALLATION INSTRUCTIONS
LAT-NR261
LED Tail Lights for 1969 Impala/Caprice
MAN#650217
Advertisement
Related Manuals for Dakota Digital LAT-NR261
Summary of Contents for Dakota Digital LAT-NR261
- Page 1 3. Carefully remove the gasket from the housing. If the gasket is hard or brittle it should be replaced. 4. Now is a good time to clean or replace the lenses and housings if necessary. If the lenses are in poor condition a replacement set is recommended. INSTALLATION INSTRUCTIONS LAT-NR261 LED Tail Lights for 1969 Impala/Caprice MAN#650217...
- Page 2 This Warranty is in lieu of all other expressed warranties or liabilities. Any implied warranties, including any implied warranty of merchantability, shall be limited to the duration of this written warranty. No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with the sale of this product.