Advanced Setting - TRENDnet TEW-310APB User Manual

Advanced Setting

This page contains configurations for advanced users, which the change will reflect the wireless
performance and operating modes.
AP Mode:
Select one of the AP operating modes for different application of Access Point.
1. AP – The normal Access Point operating mode which forms a wireless ESS network with its
wireless clients.
2. AP Client – Acts as an Ethernet-to-Wireless Bridge, which allows a LAN or a single computer
station to join a wireless ESS network through it. You must make sure that the SSID and
Channel is set to the same as that used by the AP you wish to connect.
Remote AP BSS ID : key in the LAN Mac address (NOT wireless Mac address) of the AP
that you wish to get connected.
Please note that if you leave Mac address as 000000000000, then you will get connected
by the SSID that is set in you AP.
-20-