TRENDnet TEW-310APB User Manual page 13

Step 2: Set WLAN Connection
Enter the SSID that you would like to
use and select the channel of
operation, then click "Next" to
continue.
Step 3: Set WEP Encryption
You may enable the WEP security by
selecting " Enabled ", otherwise,
simply click "Next" to continue
Select one of the WEP encryption
key size and enter the value of the
key in the Key text box, then click
"Next" to continue.
Note! There are 3 key sizes to choose
from, 64, 128 and 256 Bit, however
256 Bit will only be supported with
22Mbps series products.
Step 4: Restart
The Setup wizard is now completed.
The new settings will be effective
after the Access Point restarts.
Click " Restart " to reboot the Access
Point.
-13-