TRENDnet TEW-310APB User Manual page 54

If the IP address is assigned by DHCP server on the network, there are chances you might have to
release the IP and acquire it from DHCP server again. Here is how you do it.
Go to Start menu >
Run > type
"command"
Click "OK"
Type command, "ipconfig /renew" in the command prompt window and press Enter. This
command releases the current IP address and acquire it from the network, i.e. DHCP server, once
more.
In this case, the IP address that we acquired is 192.168. 1.3. However, it 's often that the acquired IP
address of the network adapter might would not be the same.
To renew IP under Windows 98 and Windows ME, you will have to go to the Start menu >
Note!
Run > type winipcfg and click "OK". The Windows IP Configuration Menu window would
appear, where you first click "release" button to release the current IP address, followed by clicking
of "Renew" to acquire a new IP address from network.
If the above methods for IP renew fail, you will have to try and restart the computer, which will
reinitializes the network adapter settings during startup including renewing IP address. If you still
have problems getting an IP address after computer restarts, you will have to consult with your MIS
in your office or call computer and network technicians.
-54-