Configuring Your Wireless Access Point - TRENDnet TEW-310APB User Manual

CONFIGURING YOUR WIRELESS ACCESS POINT

The web-based configuration menu provides user friendly graphic design for easy configuration.
Please go through the following check list before you consider using the configuration menu.
1. You will need a JavaScript enabled web browser such as Internet Explorer v5.5 or higher and
Netscape v4.0 or higher.
2. The Ethernet network adapter must be working properly. Please refer to Troubleshooting
section for details.
3. If you are connecting the Access Point through a router or a local area network, which has
DHCP server enabled, you will not need to assign a static IP address to the computer that you
are using to configure the Access Point. Please go to check item no. 6
4. If you are not connecting the Access Point through a router or a local area network, which has
DHCP server enabled, you will need to assign a static IP address to the computer that you are
using to configure the Access Point.
5. The IP address assigned to the computer that you are using to configure the Access Point must
be in the same IP address range as Access Point 's. Please refer to Networking Basis section to
learn more about assigning IP address.
6. The power jack must be properly inserted to make sure that the Access Point is powered.
The Default Settings of the 22mbps Access Point:
IP Address
User Name
Password
ESSID
Channel
WEP
192.168.1.1
admin
admin
wireless
6
disabled
-9-