TRENDnet TEW-310APB User Manual page 53

Checking IP Address of Your Computer In Windows XP
Sometimes you will need to know the IP address of the computer that you are using. For example,
when you want to make sure that your computer is in the same network domain as that of your
Access Point for you can configure and access the AP.
Go to Start menu >
Run > type
"command"
Click "OK"
When the command prompt window appears, type command "ipconfig /all" and press Enter. This
command will display the IP addresses of all the network adapters in your computer.
In this case, the IP address of your network adapter is 192.168.1.2 hich means your Access Point
must have an IP address of 192.168.1xxx in order for you to be able to access it.
-53-