TRENDnet TEW-310APB Quick User Installation Manual
Wireless access point + bridge
Hide thumbs
Also See for TEW-310APB:
- User manual (108 pages) ,
- Quick installation manual (4 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Quick Links
Note: TEW-310APBX functions just like TEW-310APB and
the configuration procedures are the same as the TEW-
310APB. The only difference between the two models is the
TEW-310APBX comes with 2 detachable antennas. Below is
the antenna installation instruction.
Replacing the Antenna with High Gain Antenna
You can also replace one of the antennas with a higher gain
TRENDnet antenna (4dBi Indoor Omni Directional, 6dBi Indoor
Patch Directional, or 14dBi Outdoor Directional). At default,
both antennas are transmitting/receiving data. When installing
the high gain antenna, you can choose to install it on either the
left or right antenna position. After that, go to the Access
Point's configuration page, select "Advanced Settings", and at
the bottom of the page, select the desired antenna position.
Advertisement
Table of Contents
Related Manuals for TRENDnet TEW-310APB
Summary of Contents for TRENDnet TEW-310APB
- Page 1 Note: TEW-310APBX functions just like TEW-310APB and the configuration procedures are the same as the TEW- 310APB. The only difference between the two models is the TEW-310APBX comes with 2 detachable antennas. Below is the antenna installation instruction. Replacing the Antenna with High Gain Antenna...
-
Page 3: Before You Begin
DHCP Client to request IP address, and the you can connect the TEW- 310APB to the network. To find out TEW-310APB’s IP address, you can simply run the Windows 22M AP Utility software that is in the included CD-ROM. - Page 4 Access Point To Your Network a. First, connect the power adapter to the receptor at the back of the TEW-310APB and then plug the other end of the power adapter to an electrical outlet. The Power LED will light, indicating the unit is receiving power.
- Page 5 When you have completed the steps in the previous page, your connected network should look similar to one of these: * Configure with Ethernet networked ** Configure with Computer with Computer via 5-Port Switch Wireless Network Adapter *** Configure with Ethernet networked Application Diagram: Internet sharing Computer via Crossover UTP RJ-45 cable using wireless Access Point...
- Page 6 2. Configure Network Card’s IP Address Please follow the instructions below to configure the computer’s network card’s TCP/IP settings. For Microsoft Windows XP : From the Desktop, right click on My Network Places > select Properties > double-click on the Network Connection.
- Page 7 For Windows 2000: From the Desktop, right click on My network places and select Properties > Double-click on the Local Area Connection associated with the wireless adapter > select Properties. Click Internet Protocol (TCP/IP) Click Properties Obtain IP address Automatically When you have a DHCP server (i.e.
- Page 8 For Windows Me and 98: From the Desktop, right click on Network Neighborhood > select Properties. Click TCP/IP ? Network Adapter Click Properties Obtain IP address Automatically When you have a DHCP server (i.e. Router with DHCP Server enabled) on the network Select Obtain an IP address automatically (if the Wireless Router or Access Point has DHCP...
- Page 9 For Macintosh OS: After you have completed the hardware installation, power on all the equipments, and then power on your Macintosh. In the Finder, go to the Apple menu in the upper left hand corner of the screen and select System Preferences. Select Network Click on TCP/IP tab At the Configure drop-down menu,...
- Page 10 3. Configure TEW-310APB Using Web Browser Open your web browser, at the Address box, type in http://192.168.1.1 and press Enter or click on Go. At Enter Network Password windows, in User Name box, type in admin, in Password box, also type in admin and click Ok.
- Page 11 AP Name: Enter a name for Channel: Displays the channel number the Access Point is using. this particular Access Point. three levels of WEP Key: There are SSID: The Service Set wireless encryption - 64-bit, 128-bit, Identifier is the name assigned to the wireless network.
-
Page 12: Configuration Completed
Security, and Tools tabs on the Menu Bar; or to the User’s Guide located on the CD- ROM. 5. Install TEW-310APB 22M AP Windows Configuration Utility Install the Utility on a computer running Windows 98 or above by inserting the CD- ROM to the CD-ROM drive. - Page 13 Click on Next Click on Finish 6. Configure TEW-310APB Using 22M AP Utility Double click on the 22M AP Utility shortcut icon on the desktop. Click on AP Settings to set the unit’s ESSID and Channel Click IP Settings to change the...
-
Page 14: Checking The Wireless Connection
A: Make sure that the SSID on the Wireless Adapter is exactly the same as the SSID on the Access Point or Wireless Router. Q2: The TEW-310APB Power and Link lights are not on. A: Check to see if the Power adapter is connected to the power receptor on the back of the unit and if the power source is receiving power. -
Page 15: Technical Support
A4: Find the reset button on the back of the unit, press and hold it for 5 seconds, release the button (the device will be restore its default settings), and reconfigure the unit according to this instructions. Q4: I forgot my Encryption key. A: Find the reset button on the back of the unit, press and hold it for 5 seconds, release the button (the device will be restore its default settings), and reconfigure the unit according to this instructions.