w Registering Tracks in My Library
Use
to select "Add to My Library", then press
ui
ENTER
or
p
.
The track is entered in the Library.
e Rating Function
1
Use
to select "Rating", then press
ui
2
Use
o p
to select the rating, then press
•
Use the RESTORER mode to expand the low and high frequency
components of compressed audio files and achieve a richer sound.
The default setting is "Mode 3" (vpage 94).
•
The time (default : 30 sec) for which the GUI menus are displayed
can be set at "GUI" – "NET/USB" (vpage 53).
<STATUS>
•
Use
to switch between displaying the title name, artist
name or album name.
Playing Rhapsody
Operations During Playback
Adjusting the Master Volume
MASTER VOLUME
Use
n
When the "Volume Display" setting (vpage 53) is
"Relative"
GAdjustable rangeH – – –
n
When the "Volume Display" setting (vpage 53) is
ENTER
or
.
p
"Absolute"
GAdjustable rangeH 0.0 ~ 99.0
ENTER
.
b
The adjustable range depends on the input signal, the channel
level settings, etc.
Turning Off the Sound Temporarily
(Muting)
[MUTE]
Press
.
•
The sound is reduced to the level set at "Mute Level" (vpage
53).
[MUTE]
•
To cancel, press
adjusting the master volume.
Listening with Headphones
Plug the headphones into the PHONES jack on the main
unit.
The sound from the speakers and pre-out connectors is automatically
cut.
NOTE
•
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
•
Remove your headphones when performing Audyssey Auto Setup
or adjusting the speaker volume.
to adjust the volume.
–80.5dB ~ 18.0dB
again. Muting can also be canceled by
To Stop
During playback, either press and hold
[2]
.
Stopping Playback Temporarily
During playback, press
ENTER
,
[3]
or
remote control unit.
Press again to resume playback.
Fast-forwarding or Fast-reversing
[6]
During playback, press and hold
[7]
(fast-forward), or press and hold
Control Dock for iPod only.
b
To Cue to the Beginning of a Track
During playback, either press
[8]
[9]
previous tracks) or
(to search for subsequent
tracks), or press
.
ui
ENTER
or press
[1/3]
on the sub
(fast-reverse) or
.
ui
(to search for
Need help?
Do you have a question about the AVR-4810CI and is the answer not in the manual?