Playback - Denon AVR-4810CI Owner's Manual

Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
<ZONE2/3/4 / REC SELECT>
<SOURCE SELECT>
<ZONE2 ON/OFF> <ZONE3 ON/OFF>
[ MAIN]
[QUICK SELECT]
[ZONE ON]
[SLEEP]
[MENU] [MAIN ZONE ON]
[MAIN ZONE OFF]
uio p
[VOLUME]
[MUTE]
[INPUT SOURCE
SELECT]
Sub remote control unit
0
BUTTON
<BUTTON>
[BUTTON]
<MASTER VOLUME>
uio p
<ZONE4 ON/OFF>
[
[QUICK
SELECT]
[ZONE ON]
[SLEEP]
[
[ZONE ON]
[M. ZONE CALL]

Playback

The operating procedure is the same for "q Zone Playback by Speaker Output" and "w Zone Playback
by Audio Output (PRE OUT)".
1
Turn on the AVR-4810CI's power.
(vpage 28 "Turning the Power On")
2
Turn on the zone power.
Operation on the main unit
<ZONE2 ON/OFF>
P ress
OFF> <ZONE4 ON/OFF>
or
be operated.
When the power turns on, the "
or " " indicator lights on the display.
Operation on the remote control unit
[MAIN]
P ress to display the mode for
the zone to be operated, the press
ON]
.
When the power turns on, the "
or " " indicator lights on the display.
MAIN]
[INPUT SOURCE SELECT]
Also press
b
standby mode, the power turns on.
When using ZONE2, ZONE3 or ZONE4, it is
b
possible to turn the power for the MAIN ZONE
only on or off by pressing
[MAIN ZONE OFF]
.
3
Select the input source.
Operation on the main unit
<ZONE2/3/4 / REC SELECT>
P ress
q
MAIN]
select the zone to be adjusted.
<SOURCE SELECT>
T urn
w
input source.
Operation on the remote control unit
I n the zone mode you want to operate,
[INPUT SOURCE SELECT]
press
The same input source as in the main zone can
b
be selected easily by pressing the
CALL]
on the sub remote control unit.
4
Adjust the item below.
n Adjust the Volume
Operation on the main unit
<ZONE2/3/4 / REC SELECT>
P ress
q
and select the zone to be adjusted.
<ZONE3 ON/
,
<MASTER VOLUME>
T urn
w
for the zone to
adjust.
", " "
Operation on the remote control unit
I n the zone mode whose volume you
want to adjust, press
G Adjustable rangeH
[ZONE
– – – –80dB ~ –40dB ~ 18dB
(When the "Volume Display" setting is
", " "
"Relative")
GAdjustable rangeH 0 ~ 41 ~ 99
when in
(When the "Volume Display" setting is
"Absolute")
Upon purchase, "Volume Limit" is set to "-
b
[MAIN ZONE ON]
or 10dB (71)".
n Turning off the Sound Temporarily
(MUTE)
I n the zone mode for which you want
to mute the sound, press
The sound is reduced to the level set at menu
and
"Mute Level" (vpage 53).
To cancel, either adjust the volume or press
to choose the b
[MUTE]
again.
The setting is canceled when the zone's power
b
is turned off.
b The volume can be adjusted in ZONE2 and
ZONE3.
.
[M.ZONE
to
[VOLUME]
.
[MUTE]
.