Related Manuals for Belanger VMax
Summary of Contents for Belanger VMax
- Page 1 Belanger, Inc. * P.O. Box 5470 * Northville, MI 48167 Customer Service Phone (248) 374-4700 Fax (248) 380-9681 www.vectorwash.com or www.belangerinc.com ® Operation Document Revision 5.0...
- Page 3 This manual and the accompanying equipment are protected by United States and International copyright and patent laws. You may make one copy of this manual. Do not make additional copies of this manual or electronically transmit it in any form ® whatsoever, in whole or in part, without the prior written permission of Belanger, Inc.
-
Page 5: Table Of Contents
Auto Reset Overview ..........................2-6 Programming / Operation...........................2-7 Main Screen ........................................... 2-7 Queue............................................. 2-8 About ............................................2-8 User............................................2-9 Setup ............................................ 2-12 Faults............................................ 2-21 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681... -
Page 7: Chapter 1: Introduction
® Chapter 1 Introduction Chapter 1 Introduction Chapter REV 01... -
Page 9: Operational Warning
MSDS (Material Safety Data Sheet) should be obtained from the chemical supplier before using any chemical formulation. Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804... -
Page 10: Important Safety Information
248-349-7010. It is imperative to your safety and the safety of others to understand the procedures before beginning work. Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804... -
Page 11: Important Safety Information - Must Read
THAT MAY BE A TRIP HAZARD. It is imperative to your safety and the safety of others to always follow safe work procedures. Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804... -
Page 12: Chapter 1 Introduction
The last section is the Appendix. This section will cover subjects with a greater amount of detail. Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804... -
Page 13: Warranty Information
Seller, unless made in writing and signed by a duly authorized employee of Seller. Copyright © 2001 by Belanger, Inc. All rights reserved. No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage or retrieval system, except as may be expressly permitted by the 1976 Copyright Act. -
Page 14: Spot Free (Ro): New Wave Industries, Ltd. Limited Warranty
NEW WAVE INDUSTRIES, LTD. will issue a Returned Goods Authorization (RGA) number for defective parts (see RGA Policies and Procedures on the next page). There are no other warranties expressed or implied. Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804... -
Page 15: Policy
NEW WAVE INDUSTRIES, LTD. will pay standard ground freight for warranty replacement parts. If the distributor/customer requires overnight/second day air delivery, shipping will be at customer’s expense. Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804... - Page 17 ® Chapter 2 E-1032 Programming and Large Vehicle Wash operation Chapter 2 E-1032 Programming and Large Vehicle Wash Operation Chapter REV 01...
-
Page 19: Chapter 2: E-1032 Interface
Vehicle Wash. The image below shows the keys on the keypad with a brief description of their function(s). Each function will be covered in greater detail later in this document. Function Keys Navigation Alpha/Numeric Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804... -
Page 20: Package Setup Overview
Return allows more chemical coverage when necessary. Speeds can be adjusted for more or less coverage for different parts of the vehicle. Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804... - Page 21 See Application Setup 2 for description of Fill, Air Purge, Pump 1, Pump 2, Reclaim and Water Purge. All of these will effect how Named 4 through 6 operates. Also see App. Setup 2 for changing names. Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804...
- Page 22 Brush between the cab and the trailer, rims and tires, remove bugs from the front and other areas • Turn OFF Pause and let the cycle finish Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804...
-
Page 23: Operation
End of Cycle - Light will turn ON when wash is over and “normally” will remain ON until vehicle is no longer seen by either Sonar Unit. Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804... -
Page 24: Auto Reset Overview
Any Breakaway: If Breakaway condition is removed, the system will Reset. • Any Low-Level: One second after all Low-Level conditions are removed, the system will Reset. Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804... -
Page 25: Programming / Operation
Wash Paused – Displays If ON, wash has been paused and will not complete cycle until the Input is turned OFF. Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804... -
Page 26: Queue
Photo Eye is broken or vehicle is in wash position. About This screen shows the current software version running on your machine. Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804... -
Page 27: User
The “Ovals” are ON/OFF indicators. A filled PUMP 1 FOAM AIR oval indicates that Output is ON PUMP 2 PURGE AIR PUMP 3 HIGH P (3) Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804... - Page 28 Functions forced on the FORCE 2 screen do not have associated Pump Speeds but they do have Pump selections. Make sure proper Pump is forced per function. CAUTION Do Not simultaneously force functions from two different Force screens. 2-10 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804...
- Page 29 Pressing the FIND LIMITS function key will make the machine locate its end limits if machine is in the HOME position. This MUST be performed during machine setup. 2-11 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804...
-
Page 30: Setup
Pass Order is the order in which applications will be performed in that package. Care MUST be taken not to use the same number twice in Pass Order. 2-12 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804... - Page 31 “Cab Only” feature. Typically set at approximately 12 inches longer than the longest vehicle the package will wash. Normal settings are 300 for Cab Only. 2-13 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804...
- Page 32 Exit Offset – Moves the front of the machine farther from the corners during profiling. If the machine is striking the front mirrors of the vehicle, increase the value until the machine misses the mirrors (setting range: 1 to 20). 2-14 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804...
-
Page 33: Application Setup
Use the orange arrow keys to get to the desired position if it is not automatically done for you. “SPACE” is acquired by pressing the “period” key twice. 2-15 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804... - Page 34 Purge Time if necessary. For use with RO or Reclaim Water. Named 1 – 3 Change – See Application Setup 1 2-16 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804...
-
Page 35: Pager Setup
Local Dial Length - If Local is selected, there can be either 7 or 10 digits in the phone number. Note: Modem dial-out function does not support the number 9 to access outside line. 2-17 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804... - Page 36 Wash In Use – Toggles between Wash In Use and Wash Done style of operation of Output 22. Time and Date can be set in the lower left side of this screen. 2-18 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804...
- Page 37 Press ENTER, and then press the DONE key. Note: It is recommended that enclosure is locked by pad lock when not using operator interface. 2-19 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804...
- Page 38 Pressing the RESET on this screen will zero out the posted accumulated number for packages 1-4 and the total. This RESET is completely different than the RESET on the Fault screen. The Cycles Accumulated display is non-resettable. 2-20 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804...
-
Page 39: Faults
Run cycle that was running when system faulted or when button was pressed, does not accept next vehicles package Note: Red LED will appear on the E-1032 when a Fault is active. 2-21 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL804... - Page 42 ® Belanger, Inc. * P.O. Box 5470 * Northville, MI 48167 Customer Service Phone (248) 374-4700 * Fax (248) 380-9681 VMax®: Operation 1MANUL804...
-
Page 43: Carriage Assembly
Location: AnchorRIDES Date: 2-26-2020 Address: 3600 Dr. Martin Luther King Jr. Ave. Bay: AnchorRIDES City, State, Zip: Anchorage, AK 99507 Belanger V-Max Combined Maintenance Task Checklist Initial When Maintenance Task Description Completed Wash Bay General Log the wash data cycle count Check fault screen for trends, areas requiring servicing, and document the findings Record number of vehicles since last oil change or note when last change was done. -
Page 44: Water Softener
24. Check water inlet screens in the large tank 25. Verify all nozzles are clean. Run a vehicle; inspect the pressure gauge on the pumping station during the high-pressure passes. The pressure should be within 150 PSI of original Annual Task - after the first 2,000 vehicles, change the oil change the oil every 10,000 vehicles. - Page 45 SPEED % Package Number PASS PUMP CHEM / RAPID PRESOAK 1 CHEM / RAPID PRESOAK 2 ROCKER YES/NO DRYER YES/NO HP RINSE MIN LENGTH HP RINSE EXIT OFFSET HP RINSE FUNCTION CHEMICAL STROKE LENGTH STROKE RATE OUNCES TITRATION PRESOAK 1 PRESOAK 2 DRYING AGENT Notes:...
- Page 46 Replacing the drive shaft, while not specified during the site inspection discussion is recommended based on previous experience with the Belanger butterfly arm system. Repairs are estimated to be conducted within 7 days ARO. Quote includes 2nd Day Air freight and is thus FOB Anchorage.
Need help?
Do you have a question about the VMax and is the answer not in the manual?
Questions and answers