Ip and poe+ over extended distance utp or cat5e (4 pages)
Summary of Contents for Altronix eBridge1PCT
Page 1
PLUS eBridge1PCT IP and PoE over Coax Hardened Transceiver Installation Guide Z1409 I.T.E. 43KC More than just power. Rev. 111814 Installing Company: _______________ Service Rep. Name: __________________________________ Address: _____________________________________________ Phone #: __________________...
Page 2
The receiver passes PoE power over the same coax cable to the eBridge1PCT transceiver, which, in turn, passes this power to an enabled IP camera/ device. These plug and play units facilitate a cost-effective, simple way to replace legacy analog products with new IP devices over existing coax up to 500m.
Page 3
Wiring should be UL Listed and/or Recognized wire suitable for the application. eBridge1PCT is not intended to be connected to outside plant leads and should be installed indoors within the protected premises. eBridge1PCT is intended for indoor use only.
Page 4
334m RG59U/20awg 500m 532m RG59U/18awg 500m 846m Altronix is not responsible for any typographical errors. ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 140 58th Street, Brooklyn, New York 11220 USA | 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty MEMBER IIeBridge1PCT G15U...
Need help?
Do you have a question about the eBridge1PCT and is the answer not in the manual?
Questions and answers