Adjusting The Projected Image; Raising The Projector Height; Lowering The Projector Height - Dell S500 User Manual

To power off the projector quickly, press the Power button and hold for 1 second
3
while the projector's cooling fans are still running.
NOTE:
Before you turn on the projector again, wait for 60 seconds to allow the
internal temperature to stabilize.
Disconnect the power cord from the electrical outlet and the projector.
4

Adjusting the Projected Image

Raising the Projector Height

Raise the projector to the desired display angle, and use the two tilt adjustment
1
wheels to fine-tune the display angle.

Lowering the Projector Height

Lower the projector, and use the two tilt adjustment wheels to fine-tune the
1
display angle.
1 Tilt adjustment wheel
(Angle of tilt: -3 to 0.6 degree)
30 Using Your Projector