Page 1
Model: 02A7945C0100 30 Ton Jack 08/2023 - Rev. 03 For Spare Parts, Operations & Service Manuals or Service Needs Scan the QR code or visit Tronair.com/aftermarket Tronair, Inc. Phone: (419) 866-6301 | 800-426-6301 1 Air Cargo Pkwy East Web: www.tronair.com Swanton, OH 43558 Email: sales@tronair.com...
Page 2
REVISION DATE TEXT AFFECTED 12/2015 Original Release 07/2018 Major revision 08/2023 Modified Parts List...
Model: 02A7945C0100 30 Ton Jack TABLE OF CONTENTS PAGE PRODUCT INFORMATION .............................. 1 DESCRIPTION..............................1 MODEL & SERIAL NUMBER ..........................1 MANUFACTURER .............................. 1 SAFETY INFORMATION ..............................1 USAGE AND SAFETY INFORMATION ......................1 WARNING AND DANGER SIGNS ........................1 COMPONENT SAFETY FEATURES ........................
Model: 02A7945C0100 30 Ton Jack This product can not be modified without the written approval of Tronair, Inc. Any modifications done without written approval voids all warranties and releases Tronair, Inc., it suppliers, distributors, employees, or financial institutions from any liability from consequences that may occur.
Model: 02A7945C0100 30 Ton Jack SAFETY GUIDELINES CAUTION! Do not place hands on top of jack near ram locknuts while lowering jack. Pinch points exist between top of jack and threads on ram. • Never put hands between the aircraft and the jack pad; as after aircraft has been lowered, struts may have hung up.
Model: 02A7945C0100 30 Ton Jack PREPARATION PRIOR TO FIRST USE This product is typically shipped completely assembled and tested and requires no further assembly before operation; however, there may be instances where the jack is shipped partially dis-assembled. In this case follow the General Instructions guidelines for re-assembly.
Model: 02A7945C0100 30 Ton Jack OPERATION OPERATING PARAMETERS • The user shall work in accordance with the Operator Manual. • It is not allowed to work under the raised load until it is secured by suitable means, i.e. Ram Locknut.
Model: 02A7945C0100 30 Ton Jack OPERATING INSTRUCTIONS The user should be familiar with the following statements prior to using the jack(s): CAUTION! Never put hands between the aircraft and the jack pad; as after aircraft has been lowered, struts may have hung up.
Model: 02A7945C0100 30 Ton Jack PACKAGING AND STORAGE PACKAGING REQUIREMENTS Jacks are to be packaged as required to prevent damage to legs or hydraulic equipment during shipment. HANDLING Jack can be rolled by hand on its casters. STRAPPING Jack can be strapped down by suitable means to prevent unwanted movement during shipment.
Model: 02A7945C0100 30 Ton Jack TRANSPORTATION LIFTING Lifting can be accomplished by crane and strap through top of tripod, or by fork truck under lower tripod support. Approximate weight: 1500 lbs (680 kg) TOWING See illustration • Ensure floor pads are raised to highest position •...
Model: 02A7945C0100 30 Ton Jack TROUBLE SHOOTING TROUBLE PROBABLE CAUSE ACTION Fluid leakage at pump Damaged backup ring, o-ring, piston or pump Replace pump piston or pump body body External fluid leakage at Damaged o-ring, backup ring or inner cylinder Remove ram(s) as a unit from cylinder.
• At this time flush old hydraulic fluid and dirt from over-all system and replenish with new, clean hydraulic fluid. • No modifications shall be carried out without prior written approval by Tronair. 10.2 MAINTENANCE SCHEDULE Check Fluid Level ..............Each Use Lubricate Casters ..............
CALIBRATION OF INSTRUMENTATION All gauges on the Hydraulic Power Unit can be either returned to Tronair for calibration or certified by the end user if proper calibration equipment is available. Gauges returned to Tronair for calibration will be tested with standards traceable to N.I.S.T.
If warranty coverage is approved, either replacement parts will be sent or the product will have to be returned to Tronair for repairs. If the product is to be returned, a Return Material Authorization (RMA) number will be issued for reference purposes on any shipping documents.
Page 15
Model: 02A7945C0100 30 Ton Jack This page left blank intentionally. 08/2023 | Rev. 03 Page | 12...
Model: 02A7945C0100 30 Ton Jack Parts List When ordering replacement parts/kits, please specify model, serial number and color of your unit. Item Part Number Description Z-8924 ASSEMBLY, CYLINDER Z-9030-01 WELDMENT, LOWER SUPPORT NUT, 8” STOP H-3289 Z-8988 WELDMENT, COLLAR HJ-557...
Page 17
Model: 02A7945C0100 30 Ton Jack Item Part Number Description Z-7379-01 WELDMENT, LADDER J-4718-01 BRACKET TS-3078-00 HANDRAIL J-6095-01 BRACE TS-2623-01 BRACE H-2649-09 CAP, END (SQUARE) N-2001-08-S-B ELBOW, STRAIGHT THREAD N-2002-05-S ELBOW, SWIVEL NUT N-2016-05-S TEE, RUN SWIVEL NUT N-2410-14 ELBOW, 90º MALE BOLT, HEX HEAD GRADE 5, ⅜...
Page 18
Model: 02A7945C0100 30 Ton Jack Parts List When ordering Replacement Parts/Kits, please specify Model, Color and Serial Number of your Unit. Item Part Number Description HC-2764 PUMP, HYDRAULIC HAND Z-4973 ASSEMBLY, BLOWGUN H-3331 GRATING, FIBERGLASS J-4719-01 SPACER H-1045 BREATHER A-1257-01...
Page 19
Model: 02A7945C0100 30 Ton Jack Parts List When ordering Replacement Parts/Kits, please specify Model, Color and Serial Number of your Unit. Item Part Number Description J-4497-01 PLATE, SUPPORT Z-6338 ASSEMBLY, RESERVOIR A-1256-01 ANGLE, BRACKET N-2001-08-S-B ELBOW, STRAIGHT THREAD N-2005-08-S ELBOW, MALE...
Page 20
Model: 02A7945C0100 30 Ton Jack Parts List When ordering replacement parts/kits, please specify model, serial number and color of your unit. Item Part Number Description J-6087-01 BRACKET, CYLINDER RETAINER U-1136 CASTER, SPRING LOADED U-1137 PLATE, SWIVEL LOCK Z-7150 WELDMENT, ADJUSTMENT WHEEL...
Page 21
Model: 02A7945C0100 30 Ton Jack Parts List When ordering Replacement Parts/Kits, please specify Model, Color and Serial Number of your Unit. Item Part Number Description G-1395-31 RING, EXTERNAL RETAINING G-1100-105016 BOLT, HEX HEAD GRADE 5, ¼ - 20 X 1 ¾ LONG BOLT, HEX HEAD GRADE 5, ⅜...
Page 22
Model: 02A7945C0100 30 Ton Jack Parts List When ordering replacement parts/kits, please specify model, serial number and color of your unit. Item Part Number Description STOPNUT, ⅜- 16 ELASTIC G-1202-1070 FLATWASHER, ⅜ NARROW G-1250-1070N H-3313-01 BRACKET, AIR PUMP MOUNTING HOSE ⅜ PUSH-ON 3 ½” LONG TF-1047-04*03.5...
Page 23
Model: 02A7945C0100 30 Ton Jack Parts List When ordering replacement parts/kits, please specify model, serial number and color of your unit. Item Part Number Description R-2485-01 CAP, BOTTOM HC-2000-259 O-RING, BOTTOM CAP, SERIES 2 HC-2023-259 BACKUP, BOTTOM CAP O-RING TR-2122-01...
DECLARATION of CONFORMITY The design, development and manufacture is in accordance with European Community guidelines Tripod Jack 02A7945C0100 Relevant provisions complied with by the machinery: 2006/42/EC Relevant standards complied with by the machinery: EN ISO 12100-1 Identification of person empowered to sign on behalf of the Manufacturer: Quality Assurance Representative Tronair, Inc.
Page 61
APPENDIX IV Safety Data Sheet MIL-PRF-5606 Hydraulic Fluid...
Need help?
Do you have a question about the 02A7945C0100 and is the answer not in the manual?
Questions and answers