Mac Address - D-Link DES-3550 User Manual

DES-3550 Layer 2
The following fields can be set or viewed:
Parameter
Time Interval [1s ]
Record Number [200]
64
65-127
128-255
256-511
512-1023
1024-1518
Show/Hide
Clear
View Table
View Line Chart

MAC Address

This allows the Switch's dynamic MAC address forwarding table to be viewed. When the
Switch learns an association between a MAC address and a port number, it makes an entry
into its forwarding table. These entries are then used to forward packets through the Switch.
To view the MAC Address forwarding table, from the Monitoring menu, click the MAC
Address link:
Fast Ethernet Switch User's Guide
Description
Select the desired setting between 1s and 60s, where "s" stands for
seconds. The default value is one second.
Select number of times the Switch will be polled between 20 and 200. The
default value is 20.
The total number of packets (including bad packets) received that were 64
octets in length (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were
between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received that were
between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received that were
between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received that were
between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received that were
between 1024 and 1518 octets in length inclusive (excluding framing bits but
including FCS octets).
Check whether or not to display 64, 65-127, 128-255, 256-511, 512-1023,
and 1024-1518 packets received.
Clicking this button clears all statistics counters on this window.
Clicking this button instructs the Switch to display a table rather than a line
graph.
Clicking this button instructs the Switch to display a line graph rather than a
table.
150